Cisco WVC2300 Administration Guide - Page 40
Connect the other end of the cable to the Ethernet port on the camera.
UPC - 745883579617
View all Cisco WVC2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Installing the Camera Software Moving the Camera to Another Network 5 To move the camera from a wireless network to a wired network, follow these steps: STEP 1 Unplug the power adapter from the camera. STEP 2 Connect the Ethernet network cable to your PC, router, or switch. STEP 3 Connect the other end of the cable to the Ethernet port on the camera. STEP 4 Re-connect the power adapter to the Power port on the camera. The camera's Ready LED flashes while the camera is initializing. The camera is ready for use when the Ready and Network LEDs are solidly lit. Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 33
Installing the Camera Software
Moving the Camera to Another Network
Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide
33
5
To move the camera from a wireless network to a wired network, follow these
steps:
STEP 1
Unplug the power adapter from the camera.
STEP
2
Connect the Ethernet network cable to your PC, router, or switch.
STEP
3
Connect the other end of the cable to the Ethernet port on the camera.
STEP
4
Re-connect the power adapter to the Power port on the camera. The camera’s
Ready LED flashes while the camera is initializing. The camera is ready for use
when the Ready and Network LEDs are solidly lit.