Cisco WVC2300 Administration Guide - Page 43
Using the Web-Based Configuration Utility - default ip
UPC - 745883579617
View all Cisco WVC2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
7 Using the Web-Based Configuration Utility This chapter describes the Cisco PVC2300 and WVC2300 Internet Video Camera's web-based configuration utility. The following sections are included: • Launching the Web-Based Configuration Utility, page 36 • Home, page 37 • Setup, page 41 Launching the Web-Based Configuration Utility By default, the cameras are set to receive an IP address from a DHCP server. If you do not have a DHCP server on your network, you can set a static IP address by pressing the Reset button on the camera for less than three seconds. A default IP address of 192.168.1.99 will be assigned to the camera. To determine if you have a DHCP server on your network, consult your network administrator. If you do not have a DHCP server, access your camera using the default IP address. To configure the PVC2300 or WVC2300 cameras, follow these steps to access the web-based configuration utility from your computer: STEP 1 Launch a web browser, such as Internet Explorer. STEP 2 In the Address field, enter 192.168.1.99 and press Enter. The web-based utility login window appears. If you used the Setup Wizard to configure the IP address, use that same IP address in this step. Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 36