Cisco WVC2300 Administration Guide - Page 52
Network Settings, Configuring the PVC2300 and WVC2300 Cameras, Configuring Port Forwarding
UPC - 745883579617
View all Cisco WVC2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Configuring the PVC2300 and WVC2300 Cameras Setup > Basic Setup 8 • New Time-Allows you to manually enter a new clock setting for the camera. • Set New Time-Click to implement the new date or time setting. • Time Zone-Choose the time zone for your location from the drop-down list. • Adjust for Daylight Saving Time-Select this option if your location is currently using Daylight Saving Time. Uncheck the Adjust for Daylight Saving Time check box when Daylight Saving Time ends in your time zone. • Check here if you want to update the time automatically through the NTP Server on the Internet-Enable or disable the time server feature as required. If enabled, the camera will contact a network time server at regular intervals and update its internal timer. • NTP Server Address-Enter the address of the NTP Server. • NTP Port-The default NTP port is 123. If using a different port, enter the NTP port number (1024 to 65535) in the field provided. NOTE If connecting to a router, it may be necessary to enable port forwarding. See "Configuring Port Forwarding" on page 94. Network Settings • Configuration Type-From the drop-down list, choose the configuration type: - Fixed IP Address-Use this option to assign a fixed (static) IP address to the camera. Assign an IP address that is unique to your local network. When using a fixed IP address, you must configure the IP address, subnet mask, gateway, and DNS. - Obtain An IP Address Automatically-The camera defaults to this option, allowing a DHCP server on your network to automatically assign the camera an IP address. • IP Address-IP address assigned to the camera. • Subnet Mask-Subnet mask assigned to the camera. Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 45