Cisco WVC2300 Administration Guide - Page 94
Defining Preset Positions for Patrol Sequence, Setup, Applications > RS-485, Enable RS485
UPC - 745883579617
View all Cisco WVC2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Sample Configurations Defining Preset Positions for Patrol Sequence 9 Defining Preset Positions for Patrol Sequence NOTE You can only use this feature if you have an external PTZ base that supports Pelco D Protocol. To define preset positions for the camera patrol sequence, follow these steps: STEP 1 Click Setup in the toolbar. STEP 2 Click Applications > RS-485. The Applications > RS-485 window displays. STEP 3 To enable RS485, check the Enable RS485 check box. STEP 4 In Preset Position, click Set Preset Position to display the Set Pan/Tilt window. STEP 5 In the Set Pan/Tilt window, configure the following: • Set Home-Set the desired position and then click Set Home to define the home position. • Preset List-Select the desired preset position and the screen will update with the current data for the selected preset. If you don't need the desired preset position, click Remove. • Preset Name-Enter a suitable name for the current desired position and then click Add button to add to the preset list. • Pan Speed-Select the desired speed for camera panning. Default value is 5. • Tilt Speed-Select the desired speed for camera tilting. Default value is 5. STEP 6 Click Save. You are returned to the Applications > RS-485 window. STEP 7 Your preset position is listed in the Patrol Sequence. Repeat the steps to define additional preset positions, if needed. STEP 8 Click Save. Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 87