Cisco WVC2300 Administration Guide - Page 79
Event Attachment, Configuring the PVC2300 and WVC2300 Cameras, Applications > I/O
UPC - 745883579617
View all Cisco WVC2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Configuring the PVC2300 and WVC2300 Cameras Applications > Event 8 - Enable SMB/CIFS-Check the box to enable SMB/CIFS alerts. Alerts are recorded and sent to the NAS device (SMB/CIFS server). - Upload Path-Enter the folder name to upload alert notification to a NAS device (SMB/CIFS server). - Login Name-Enter the user's login name for the NAS device (SMB/CIFS server). - Password-Enter the user password for the NAS device (SMB/CIFS server). - Output 1/2-If checked, the output port(s) state will be activated when an alert is detected. Output port(s) alerts require pre-configured I/O port setting in the Applications > I/O Ports window. See "Applications > I/O Ports" on page 75. - Instant Messaging-If checked, an instant message will be delivered to the Jabber server when an alert is detected. Jabber alerts require preconfigured Jabber settings in the Applications > Instant Messaging window. See "Applications > Instant Messaging" on page 67. Event Attachment When trigger events are enabled and an e-mail or FTP action is selected, the following options are enabled: • Overwrite/Replace oldest video file-Check the box to overwrite and replace the oldest video clip with the current recording when detecting device's SDRAM is full. • Attachment Type-From the drop-down list, select the type of attachment: - JPEG Image-Select to send image captures. - Frame Rate-Select the desired capture rate for the JPEG image(s). - Pre/Post Capture-Select the desired length. The snapshot(s) of the JPEG image depends on this setting, and also the file size and degree of compression. • Video-Select to send video captures. Cisco PVC2300 and WVC2300 Internet Video Cameras with Audio Administration Guide 72