Clifford AvantGuard 5 Owners Guide - Page 12

using your system The buttons used in the instructions in this manual correspond to the standard transmitter configuration. If your transmitter has been custom configured, the icons on your transmitter buttons may not correspond to the indicated functions. arming with transmitter You can activate, or arm, the system by pressing on your trans- mitter for one second. When the system arms, you will hear two short siren sounds, or chirps, and see the parking lights flash twice. The LED will begin to flash steadily. If the vehicle's power door locks have been connected to the system, the doors will lock. While the system is armed, the LED status indicator will flash approximately once per second showing that the system is actively protecting your vehicle. If you hear more than two chirps when arming, refer to the Diagnostics section of this guide. These extra chirps confirm a malfunction autobypass. arming without transmitter The security system also can be programmed to arm itself without a transmitter (called passive arming). If the system is programmed for passive arming, it will automatically arm 30 seconds after the ignition is turned off and the system sees you leave the vehicle by opening and closing a door. The siren will chirp twice and the lights will flash twice five seconds after the last door has been closed. The system is not actu- © 2004 directed electronics, inc. 9