Clifford AvantGuard 5 Owners Guide - Page 17
disarm/valet mode
View all Clifford AvantGuard 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
disarm/valet mode Entering your pin code using the PlainView 2 Valet switch allows you to disarm the system or enter valet mode without using the transmitter. In valet mode, the security system will not arm, even with the transmitter, but all convenience functions (door locks, trunk release, etc.) will continue to work normally. To disarm or enter Valet Mode: 1. Turn the ignition on. 2. Enter PIN code (factory setting is 2 - this procedure is described later in this manual). 3. After the last digit of the pin code is entered: a. To disarm the system: press and release . b. To enter valet mode: Press and hold for three seconds. The LED status indicator will light steadily when Valet Mode has been entered. To exit Valet Mode: 1. Turn the ignition on. 2. Enter PIN code. 3. After the last digit press for one second. The LED status indicator will turn off when Valet Mode has been exited. 14