Clifford AvantGuard 5 Owners Guide - Page 46

6. Press of the remote control to return to Primary zone adjustment and lock in Warn Away zone setting. z Siren chirps 2 times. z Primary zone can now be re-adjusted as described in step 3. z Or press again to lock in primary zone setting and exit programming mode. z The siren will chirp 3 times when sensor adjustment mode has been exited. z Auto-Scroll for adjusting sensitivity - press and hold or to increase or decrease sensitivi- ty setting several levels rapidly. adjusting the omnisensor The Omnisensor is designed for ease of adjustment by the user and to give the ultimate in impact detection without the possibility of false triggers that are common with less sophisticated sensor. While adjusting this sensor it is required that you strike the vehicle with the amount force that is desired for the system to trigger. note: DO NOT strike window glass or flat sheet metal panels that can dent easily. It is recommended that you only strike the metal pillars between the windows, they are structurally sound enough not to dent. ONLY strike the pillars using the heel of your hand, it is more than sufficient for the sensor to distinguish this as a theft attempt. 1. Disarm system 2. Transmit Channel 15 (Press 1 time). 3 times then z The LED will turn on and the siren will chirp 1 time. © 2004 directed electronics, inc. 43