Clifford AvantGuard 5 Owners Guide - Page 27
user selectable features
View all Clifford AvantGuard 5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
nnuomteb: Reerf.er to the Feature Descriptions sections of this guide for impor- tant notes and descriptions of the system features and programming. 7. Exit programming - To exit programming mode turn the ignition off or wait 60 seconds without pressing the PlainView 2 Valet switch. The siren will chirp three times to indicate programming mode has been exited. user selectable features First Press Then Press Add new remote (autolearn) Auto (passive) arm off/on Chirps off/on/quiet Auto lock off/ignition/rpm Auto unlock off/ignition Auto (passive) arm and lock off/on Siren duration 30/60/90 Second unlock off/on Not used Set PIN code (default = 2) New remote learn arm/disarm only Select siren sounds New remote learn accessory A channel FACT II off/on New remote learn accessory B channel Remote valet off/on New remote learn silent mode Entry delay off/on New remote learn remote valet Reset to default New remote learn (except transmitter remote start* and valet code) Panic off/on New remote learn window down/vent** Autostart setting* New remote learn (off/battery only/ accessory C channel temp only/ battery and temp) BlackJax off/on Clear all remotes * This feature is only available with IntelliStart connected. ** This feature is only available with optional SmartWindows connected. 24