Clifford Concept 30 Owners Guide - Page 10

TO ACTIVATE Press button 1 for 3 seconds. The lights will flash repeatedly THE PANIC and the Insignia™ siren will blare for 30 or 60 seconds FEATURE user-selectable), or until you press button I again to turn it off. TO SILENTLY Press button 3 (channel 3). Your Concept 30 system will arm ARM OR DISARM or disarm with all the indications noted on the previous page THE SYSTEM except for the chirp acknowledgments. TO REMOTELY TURN ON THE HEADLIGHTS - OR - REMOTELY CLOSE THE WINDOWS WHILE THE SYSTEM IS ARMED Button 2 (channel 2) controls an electronic interlock that allows you to separately command two different options with the same channel: one when the system is armed and another when it is disarmed. For instance, if your Concept 30 was so wired, pressing button 2 while the alarm is armed will either turn on the headlights for any duration you wish between 1 second and 2.5 minutes (see the Built-In Timer feature in the User-selectable features section on pages 16-17) OR will fully close all the power windows and sunroof on various Jaguar, BMW and Volkswagen vehicles. TO REMOTELY OPEN THE TRUNK . . . As noted above, button 2 (channel 2) can control yet another option when the system is disarmed. The most obvious one is the remote trunk release. If you have this option installed, pressing button 2 while the alarm is disarmed will remotely open the trunk. TO ACTIVATE Button 4 (channel 4) and channels 5-12 (see How to use your OTHER OPTIONS keychain remote control on page 6) can activate other REGARDLESS OF accessories such as the Clifford IntelliStart remote engine ALARM STATE starter, remote memory seat activation or SmartWindows II remote window roll-down and venting, as well as single Programmable Receiver(s) that lets you command your electric garage door and/or gate opener(s), etc. You may also assign any of these channels to control Clifford systems on your other vehicle(s). AntiScan™ Thieves can disarm some other brands of car alarms with a "scanner" that rapidly transmits one remote control code after another. Clifford's AntiScan will detect any scanner and block the codes it generates. 8