Clifford Concept 30 Owners Guide - Page 9

two chirps, One chirp

Get Clifford Concept 30 PDF manuals and user guides View all Clifford Concept 30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

What each button/channel does Your Concept 30 remote controls come pre-programmed so that certain channels command certain functions. If you wish, you can actually assign any channel to any function (see pages 16-18). The following chart indicates what each remote control channel number does, and how to transmit each channel number. Factory settings of the 12 remote control channels Transmitting channel number: Causes the system to: Press the How Press LevelShift many button button? times? number 1 arm or disarm and lock or unlock the doors no - 1 pop the trunk* (if the system is disarmed) 2 AND no turn on the headlights* or close the windows* (if the system is armed) - 2 3 silently arm or disarm no - 3 4 activate optional accessory function #1 no - 4 5 activate optional accessory function #2 yes once 1 6 activate optional accessory function #3 yes once 2 7 activate optional accessory function #4 yes once 3 8 activate optional accessory function #5 yes once 4 9 activate optional accessory function #6 yes twice 1 10 activate optional accessory function #7 yes twice 2 11 activate optional accessory function #8 yes twice 3 12 activate optional accessory function #9 yes twice 4 * May require additional wiring. TO ARM Press button 1 (channel 1) once. You will hear two chirps and THE SYSTEM the parking lights will flash twice. The dashboard LED will flash repeatedly and the car doors will automatically lock. TO DISARM THE SYSTEM Press button 1 (channel 1) again. One chirp and one flash of the parking lights will confirm disarming. In addition, the car doors will automatically unlock and the interior lights will turn on and stay on for 30 seconds or until you start the engine, whichever occurs first.. continued . . . 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
What each button/channel does
Your Concept 30 remote controls come pre-programmed so that certain channels
command certain functions. If you wish, you can actually assign any channel to any
function (see pages 16–18). The following chart indicates what each remote control
channel number does, and how to transmit each channel number.
Factory settings of the 12 remote control channels
Transmitting
channel
number:
Causes the system to:
Press the
LevelShift
button?
How
many
times?
Press
button
number
1
arm or disarm and lock or unlock the doors
no
—
1
2
pop the trunk* (if the system is disarmed)
AND
turn on the headlights* or close the windows* (if the system is armed)
no
—
2
3
silently
arm or disarm
no
—
3
4
activate optional accessory function #1
no
—
4
5
activate optional accessory function #2
yes
once
1
6
activate optional accessory function #3
yes
once
2
7
activate optional accessory function #4
yes
once
3
8
activate optional accessory function #5
yes
once
4
9
activate optional accessory function #6
yes
twice
1
10
activate optional accessory function #7
yes
twice
2
11
activate optional accessory function #8
yes
twice
3
12
activate optional accessory function #9
yes
twice
4
* May require additional wiring.
TO ARM
THE SYSTEM
. . . . . . .
Press button 1 (channel 1) once. You will hear
two chirps
and
the parking lights will flash twice. The dashboard LED will
flash repeatedly and the car doors will automatically lock.
TO DISARM
THE SYSTEM
. . . . . . .
Press button 1 (channel 1) again.
One chirp
and one flash of
the parking lights will confirm disarming. In addition, the car
doors will automatically unlock and the interior lights will
turn on and stay on for 30 seconds or until you start the
engine, whichever occurs first..
continued . . .
7