Clifford Concept 30 Owners Guide - Page 20
Authorized Clifford Dealer or call our 24-hour Customer Service
View all Clifford Concept 30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Example To change the AutoArming feature from its factory setting of on to off, you would do the following: Turn the ignition key to the ON position. Enter your valet code, then immediately tap and release the momentary side of the PlainView switch 4 times (you will hear a single chirp upon the 4th press). Wait 3 seconds. The system will sound one more chirp to confirm that the AutoArming setting has been changed. Turn the ignition off (you'll hear 3 chirps to confirm exit of program mode). That's all there is to it! Adding new remote controls For other drivers in your family or if you wish to control Concept systems on your other cars with the same remote control, you can buy additional remote controls from any Authorized Clifford Dealer (or call our 24-hour Customer Service Department at 800-824-3208) and program them into the system yourself. Each Concept 30 will respond to as many as four 12-channel remote controls. To add a new remote control to the system, use the procedures noted in the User-selectable features section on pages 16-17. How to erase the codes of lost or stolen remote controls If one of your remote controls is ever lost or stolen, you can push its digital codes out of the system memory to make sure that the missing remote control can never be used to disarm your system. To do so, just re-program your current remote control(s) as noted in the User-selectable features section on pages 16-17 for a total of four times (e.g., if you have one remote control remaining, program it four times; if you have two remote controls, program each twice). 18