Clifford Concept 30 Owners Guide - Page 15

roof closure, DO NOT CHANGE THE TIMER SETTING! This requires

Get Clifford Concept 30 PDF manuals and user guides View all Clifford Concept 30 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

Automatic malfunction bypass To provide the utmost protection even if a system component malfunctions, your Concept 30 will automatically bypass the faulty point and arm all other triggers and sensors until you can have the system serviced by your local Authorized Dealer. TotalRecall™ The system's non-volatile memory records the identity of the last activated or malfunctioning trigger and/or sensor, which allows your installer to instantly track down malfunctions and save you substantial servicing costs. To identify the trigger and/or sensor held in the system's non-volatile memory, perform the following procedure: 1. With the ignition OFF, flick the PlainView switch to its latched side. 2. Press button I to "arm" the system, then again to "disarm." 3. The LED will blink 1-5 times, pause, then repeat the blink cycle 4 times. 4. Count the number of blinks in one cycle and refer to the chart below: Number of LED blinks per cycle Trigger/sensor that was activated or malfunctioned 1 blink 2 blinks 3 blinks 4 blinks 5 blinks Magnetic Resonance Sensor Proximity Sensor Door trigger Trunk trigger Hood trigger Remote headlight activation OR window/sunroof closure The system's built-in timer can control one of two great features when the system is in its armed state (these features require optional wiring): Remote Controlled Headlight Activation OR Remote Controlled Window/Sunroof Closure (available only on certain vehicles) Please see page 8: "To remotely turn on the headlights OR remotely close the windows while the system is armed." If connected to the headlights, you may set the timer to any interval between 1 sec. and 2.5 min. See User-selectable features on pages 16-17. WARNING: If your system's built-in timer controls window/sunroof closure, DO NOT CHANGE THE TIMER SETTING! This requires installer-only programming. Changing the value will adversely effect operation and may cause damage. Headlight reminder If you turn the ignition off and open the driver's door to exit the car without having turned off the headlights, you will be reminded to turn them off with a distinctive warning tone. If your vehicle already has a similar warning feature, you may turn off the Headlight Reminder feature. See User-selectable features on pages 16-17. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
Automatic malfunction bypass
To provide the utmost protection even if a system component malfunctions, your
Concept 30 will automatically bypass the faulty point and arm all
other
triggers and
sensors until you can have the system serviced by your local Authorized Dealer.
TotalRecall™
The system’s non-volatile memory records the identity of the last activated or mal-
functioning trigger and/or sensor, which allows your installer to instantly track down
malfunctions and save you substantial servicing costs. To identify the trigger and/or
sensor held in the system’s non-volatile memory, perform the following procedure:
1.
With the ignition OFF, flick the PlainView switch to its latched side.
2.
Press button I to “arm” the system, then again to “disarm.”
3.
The LED will blink 1–5 times, pause, then repeat the blink cycle 4 times.
4.
Count the number of blinks in one cycle and refer to the chart below:
Number of LED blinks per cycle
Trigger/sensor that was activated or malfunctioned
1 blink
Magnetic Resonance Sensor
2 blinks
Proximity Sensor
3 blinks
Door trigger
4 blinks
Trunk trigger
5 blinks
Hood trigger
Remote headlight activation OR window/sunroof closure
The system’s built-in timer can control one of two great features when the system is
in its armed state (these features require optional wiring):
Remote Controlled Headlight Activation OR
Remote Controlled Window/Sunroof Closure (available only on certain vehicles)
Please see page 8:
“To remotely turn on the headlights OR remotely close the windows
while the system is armed.”
If connected to the headlights, you may set the timer to
any interval between 1 sec. and 2.5 min. See
User-selectable features
on pages 16–17.
WARNING: If your system’s built-in timer controls window/sun-
roof closure, DO NOT CHANGE THE TIMER SETTING! This requires
installer-only programming. Changing the value will adversely
effect operation and may cause damage.
Headlight reminder
If you turn the ignition off and open the driver’s door to exit the car without having
turned off the headlights, you will be reminded to turn them off with a distinctive
warning tone. If your vehicle already has a similar warning feature, you may turn
off the Headlight Reminder feature. See
User-selectable features
on pages 16–17.
13