Clifford Matrix RS Owners Guide - Page 11

off. After the ignition has been turned off, the LED status indicator will flash rapidly to indicate that the system is in Passive Mode. If Passive Mode has been programmed on, then it is also possible to program the system for Passive Locking. With Passive Locking, the doors lock automatically at the same time that the starter interrupt is activated. If Passive Locking is programmed on, care must be taken to prevent the keys from being locked in the vehicle. note: For Passive Mode to be effective, the starter interrupt relay must be installed. ➜ unlocking/disarming When the system is already armed, pressing for one second disarms the system and unlocks the doors (if connected). The horn will honk twice (if connected) and the parking lights will flash twice to confirm disarming. The optional starter interrupt will be deactivated. The LED status indicator will turn off, unless the system is programmed for Passive Mode. In Passive Mode, the LED status indicator will flash rapidly when the system is disarmed. This indicates that the system will re-engage the starter interrupt and re-lock the doors (if Passive Locking has been programmed) in 30 seconds unless the ignition is turned on. ➜ disabling the starter interrupt without a transmitter If your remote transmitter is lost or damaged, you can manually override the optional starter interrupt. To do this, you must have 8 © 2001 directed electronics, inc.