Clifford Matrix RS Owners Guide - Page 14
shutting down the remote start system
View all Clifford Matrix RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3. Release the button as soon as the parking lights flash. (In gasoline vehicles, the engine will start 3 seconds after the parking lights flash. In diesel vehicles, the engine will start when the wait-to-start indicator on the vehicle's dash goes out.) 4. Once the vehicle has started, it will run for the pre-program- med period of time (either 12, 24, or 60 minutes - see Programming Options section of this guide) or until a shut- down input is triggered. When you are ready to drive the vehicle: 1. Insert the ignition key and turn it to the ON (not the START) position. 2. Press the brake pedal. note: If the brake pedal is pressed before the key is in the ON position, the engine will shut down. ➜ shutting down the remote start system While the vehicle is running during remote engine starting operation, the system will monitor the vehicle and will automatically shut down the engine if the system receives any of the following shut-down inputs: ➤ The brake pedal is pressed. ➤ The hood is opened. © 2001 directed electronics, inc. 11