Clifford Matrix RS Owners Guide - Page 17
starterguard anti-grind circuitry, disabling the remote engine starting system
View all Clifford Matrix RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
To exit Timer Mode: Timer Mode can be exited by turning the ignition on with the key any time the engine is not running. You can also exit Timer Mode with the remote transmitter by following these steps: 1. Start the engine by pressing . 2. Press and release . 3. Within two seconds press and release again. 4. The engine will shut down and the parking lights will flash four times to confirm that Timer Mode has been exited. If the car has already been remote started, skip Step 1. ➜ starterguard anti-grind circuitry Whenever the vehicle is remote started, advanced anti-grind circuitry prevents the starter from engaging, even if the key is turned to the start position. This prevents damage to the starter motor if the key is turned to the start position during remote engine starting operation. note: Anti-grind circuitry only works when the remote engine starting system is operating the motor and the starter interrupt relay is installed. ➜ disabling the remote engine starting system This feature allows your system's remote engine starting unit to be temporarily disabled to prevent the vehicle from being remote started accidentally. This feature is useful if the vehicle is being serviced or stored in an enclosed area. To disable the remote 14 © 2001 directed electronics, inc.