Clifford Matrix RS Owners Guide - Page 16
timer mode
View all Clifford Matrix RS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
note: This feature will not work if the brake pedal is being pressed. ➜ timer mode Timer Mode automatically starts and runs the engine for a preprogrammed time period, every three hours for a total of six operation cycles. This feature helps to ensure that your engine will start in the morning after a night of extremely cold temperatures. important! This feature must only be used in open areas, never in an enclosed area such as a garage. To enter Timer Mode: 1. Start the vehicle by pressing and releasing . 2. Press and release . 3. Within two seconds press and release again. 4. The engine will shut down and the parking lights will flash four times. The engine will then restart to confirm that Timer Mode has been entered. The engine may be allowed to run for its pre-programmed time period, or it can be shut down while running during Timer Mode operation by pressing again. In either case, the vehicle will restart every three hours for a total of six operation cycles. If the system receives a shut-down input while the engine is running in Timer Mode, the engine will stop, but will restart, on schedule, again in three hours! © 2001 directed electronics, inc. 13