Clifford Matrix RS Owners Guide - Page 24

✂ Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet. ✂ quick reference guide To lock/arm using your remote ➤ To arm the system press for one second. The doors will lock (if connected). The LED will begin to flash. The starter interrupt will prevent the vehicle's starter from cranking if it has been installed. The vehicle's horn (if connected) will honk and the parking lights will flash once to confirm arming of the system. To unlock/disarm using your remote ➤ To disarm the system press for one second. The doors will unlock (if connected). The starter interrupt will be deactivated and the vehicle's horn (if connected) will honk twice and the parking lights will flash twice. Disabling the starter interrupt without a transmitter ➤ Turn on the ignition. Press and release the Valet switch within 10 seconds. The LED will stop flashing and the vehicle should start. Be sure to check with the installer for the location of the Valet switch. To remote start the vehicle ➤ Press . The parking lights will turn on (if connected) and the vehicle will start and run for the programmed amount of time. To enter or exit Valet Mode ➤ Turn the ignition to the "ON" position. Turn the ignition back off. Press and release the Valet switch within 10 seconds. The LED status indicator will light steadily if you have entered Valet Mode. To exit Valet Mode, repeat the steps above. The LED will turn off when exiting Valet Mode. To activate Panic Mode ➤ Press and hold for 1.5 seconds. To disable the remote engine starting system ➤ To disable the remote start, move the shutdown toggle switch to the OFF position. Location of Shutdown Switch © 2001 directed electronics, inc. 21