Compaq 12XL300 Models XL300, XL300A, and XL300B - Maintenance & Service Gu - Page 64
Solving Display Problems Continued, Problem, Probable Cause, Solutions, with Fn+F7 or Fn+F8.
UPC - 720591463632
View all Compaq 12XL300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Presario 1200XL Series Model XL300, XL300A, and XL300B Problem The light tubes on the edge of the display panel do not light up at all and Power-On Self-Test (POST) does not complete when the unit is powered up.* Backlight (brightness) cannot be adjusted with Fn+F7 or Fn+F8. Solving Display Problems Probable Cause Solution(s) Defective system board. Replace the system board. Improper display cable connections. Defective inverter board. Defective display cable. Defective system board. 1. Reseat the display cable to the system board. 2. Replace the display assembly. Replace the display assembly. Replace the display assembly. Replace the system board. *This problem indicates that the backlight or its power circuitry has failed. If the backlight is not functioning, the POST result cannot be observed. Connect the unit to an external monitor before powering up the unit. If an external monitor is not available, verify that POST is complete by opening and closing the display, listening for the single or double beep, and watching for the icons to turn on at the front of the Notebook. Solving Display Problems Continued Problem Probable Cause Solution(s) This display panel has a continuous pattern across it (e.g., "jailbars" pattern), has a single color on it, or has garbled graphics across the entire panel. This failure is for patterns across the entire panel (not just on one section). Improper display cable connections Reseat the display cable to the following until the problem is solved: 1. System board 2. Display assembly Defective display cable. Replace the display assembly. Defective inverter board. Replace the display assembly. PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1200XL SERIES TROUBLESHOOTING 27