Compaq 12XL310 Presario 1200 Series Models XL101-XL113, XL115, XL118-XL127 - M - Page 94
CAUTION, To replace the palmrest cover, reverse these procedures.
UPC - 720591578398
View all Compaq 12XL310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Presario 1200 Series Models: XL101-XL113, XL115, XL118-XL127 4. Turn the Notebook over (right side up). 5. Pull the display release latches to open the display. 6. Lift up the front end and turn over the palmrest cover, allowing it to rest on top of the keyboard. 7. Disconnect the flex cable from the ZIF connector on the palmrest cover. To replace the palmrest cover, reverse these procedures. Ä CAUTION: When replacing the palmrest cover, ensure that the cable is fully inserted into the ZIF connector on the system board. If the metal end comes in contact with the keyboard, the Notebook may be damaged. Note: When replacing the palmrest cover, ensure that the cable is properly routed through the slot on the Upper CPU Cover. 14 REMOVAL SEQUENCE PRESARIO NOTEBOOK MAINTENANCE AND SERVICE GUIDE 1200XL SERIES