Compaq 8100 vPro Setup and Configuration for the 8100 Elite Business PC with I - Page 26
Enterprise Mode – AMT Setup and Configuration Steps:, Go into ME ON in Host Sleep States
View all Compaq 8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Enterprise Mode - AMT Setup and Configuration Steps: The AMT Setup portion for Enterprise mode is the same as SMB mode. Repeat Steps 1 through 15 to perform AMT Setup. This will take the system from Factory mode to In Setup Mode. Refer to Manual Mode - AMT Setup and Configuration for screen shots of MEBx menus and full text. The following are quick steps for AMT Setup. 1) Get into the MEBx by pressing Ctrl-P during POST. 2) Enter the default password "admin". 3) Change the MEBx password, follow strong password guidelines. 4) Go into Intel ME Platform Configuration. 5) Check the Intel ME State Control, select Enabled. 6) Check the Intel ME Firmware Local Update Qualifier, select Always Open. 7) Go into Intel ME Power Control. a. Go into ME ON in Host Sleep States, select Option 2 (Desktop: ON in S0, ME Wake in S3, S4-5) 8) Go into the Intel ME General Settings. The Intel ME Platform Configuration screen has more options than could be displayed in one page. More options are available if the menu is scrolled down. 9) Password Policy Default Setting Recommended Setting : Default Password Only : Default Password Only This option will determine if the local MEBx password can be modified from a remote console. Option Default Password Only During Setup and Configuration Anytime Effect This option will allow the MEBx password to be remotely modified only if it is the default "admin" password. This option will allow the MEBx password to be remotely modified only during Setup and Configuration of the AMT platform. This option will allow the MEBx password to be remotely modified at any time. 26