Compaq 8100 vPro Setup and Configuration for the 8100 Elite Business PC with I - Page 48
Appendix C: Wake-On-ME Explained, ME On in Host Sleep State setting is set to allow ME WoL.
View all Compaq 8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Appendix C: Wake-On-ME Explained Wake-On-ME, also known as ME WoL, is a feature that allows the ME to go into a low power state when it is not used. There are three conditions that must be met for Wake-On-ME to function. • The system is in a sleep state: S3, S4, or S5 • ME On in Host Sleep State setting is set to allow ME WoL. • Idle Timeout setting is set to a non-zero value. The system must be in a sleep state (S3, S4, or S5) for Wake-On-ME to function. If the system is running (S5), then the ME is also running. The ME On in Host Sleep State setting must be set to ME WoL so the ME can be put to sleep and awaken if needed when the system is in a sleep state. The ME counts down from the amount of time set in Idle Timeout before it will go to sleep. The Idle Timeout must be set to a non-zero value. If it is set to zero, then that means the Wake-On-ME feature is disabled and the ME will not go to sleep when not being used. © 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Itanium is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. 434476-006,January 2010 48