Compaq 8100 vPro Setup and Configuration for the 8100 Elite Business PC with I - Page 9
DHCP Mode, Default Setting, Enabled, Recommended Setting, Wired LAN IPV4 Configuration
View all Compaq 8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
8. TCP/IP Settings. AMT 6.0 supports IPV4 and IPV6 interface. Follow steps 8a-8f to configure for IPV4 and 8g-8h for IPV6. Figure 4: Intel ME TCP/IP Settings Screen a. Wired LAN IPV4 Configuration DHCP Mode Default Setting : Enabled Recommended Setting : Enabled DHCP can be used if it is available (TCP/IP settings will be configured by a DHCP server). If DHCP is disabled, then steps 8b through 8f are required to configure the IPv4 static IP address for Intel AMT. 9
9
8.
TCP/IP Settings.
AMT 6.0 supports IPV4 and IPV6 interface. Follow steps 8a-8f to configure for
IPV4 and 8g-8h for IPV6.
Figure 4
: Intel ME TCP/IP Settings Screen
a.
Wired LAN IPV4 Configuration
DHCP Mode
Default Setting
: Enabled
Recommended Setting
: Enabled
DHCP can be used if it is available (TCP/IP settings will be configured by a
DHCP server).
If DHCP is disabled, then steps 8b through 8f are required to
configure the IPv4 static IP address for Intel AMT.