Compaq 8100 vPro Setup and Configuration for the 8100 Elite Business PC with I - Page 34

d. IDE Redirection Default Setting : Enabled Recommended Setting : Enabled Select Enabled. e. Legacy Redirection Mode. Default Setting : Disabled Recommended Setting : Disabled Select Disabled. This option allows the Redirection feature to work with the pre-AMT 6.0 remote consoles (need to set to Enabled). 20) Check KVM Configuration. a. KVM feature Selection. Default Setting : Enabled Recommended Setting : Enabled b. User opt-in. Default Setting : User Consent is required for KVM session Recommended Setting : User Dependent c. Opt-in Configuration from remote IT Default Setting : Enabled Remote Control of KVM Opt-in Policy Recommended Setting : User Dependent Disable Remote Control of KVM Opt-in Policy - This option disables the Remote User's ability to select User OPT-IN Policy. In this case only the local user can control the opt-in policy. Enable Remote Control of KVM Opt-in Policy - Enables Remote User's ability to select User OPT-IN Policy 21) Return to MEBx Main menu. And select Exit. Select Y. This will exit the MEBx Setup and save settings. 22) The system will display an Intel ME Configuration Complete message (only once). 23) System will reboot. 24) Turn off system and remove power. At this point the system is out of Factory Mode and is in In-Setup mode. It is ready to be deployed in a corporation. 25) User plugs system into a power source and connects the network. Only use the integrated Intel NIC. Intel AMT does not work with any other NIC solution. 34