Compaq Armada V300 Compaq Armada V300 Series Reference Guide - Page 165
Solving Infrared Problems
View all Compaq Armada V300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
Problem Cannot communicate with another computer Solving Infrared Problems Possible Cause Solution The required software is not running on both computers. Install the required software on the second computer, start the second device, and start the program on both computers. One computer does not have an IrDAcompliant infrared port. Communication between infrared devices must use the same protocol. The pathway between Remove the obstruction, the infrared ports is align the infrared ports to obstructed, one port is within 30 degrees, and more than 30 degrees position computers within (plus or minus 15 1.5 feet (about 0.5 meter) degrees off the center of each other. line) from the other, or the ports are more than 1.5 feet (about 0.5 meter) apart. There is an interrupt request (IRQ) conflict. Check for IRQ conflicts in the Device Manager on one or both computers. If the Device Manager indicates an IRQ conflict, reassign the IRQ number for one of the conflicting devices. There is a baud rate Select the same baud conflict. rate for both computers. There is a conflict with Select the same "# bits" the # bits. setting for both computers. There is a stop bit conflict. Select the same stop bit for both computers. There is a parity conflict. Select the same parity setting for both computers. Continued 16-28 Troubleshooting