Compaq Armada V300 Compaq Armada V300 Series Reference Guide - Page 95
Removing a PC Card
View all Compaq Armada V300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Removing a PC Card 1. If you are running Windows 95 or Windows 98, you must stop the PC Card before removing it (see "Stopping a PC Card" later in this chapter). You do not need to turn the computer off or initiate Suspend. If you are running Windows NT 4.0, you must close Windows NT 4.0 and turn off the computer. CAUTION: Failure to stop a PC Card before removing it may cause loss of data. 2. To release the PC Card eject button, depress the button 1 once. To eject the PC Card, firmly depress the PC Card eject button a second time. 3. Remove the card 2. NOTE: If you are running Windows 95, the computer beeps twice if it is turned on when the PC Card is removed. Using PC Cards 9-3
Using PC Cards
9-3
Removing a PC Card
1. If you are running Windows 95 or Windows 98, you must stop
the PC Card before removing it (see “Stopping a PC Card”
later in this chapter). You do not need to turn the computer off
or initiate Suspend. If you are running Windows NT 4.0, you
must close Windows NT 4.0 and turn off the computer.
CAUTION:
Failure to stop a PC Card before removing it may
cause loss of data.
2. To release the PC Card eject button, depress the button
1
once. To eject the PC Card, firmly depress the PC Card eject
button a second time.
3. Remove the card
2
.
NOTE:
If you are running Windows 95, the computer beeps twice if
it is turned on when the PC Card is removed.