Compaq Armada m700 Compaq Armada M700 Series of Personal Computers Maintenance - Page 80
Preparing the Computer for Disassembly, Remove all PC Cards
View all Compaq Armada m700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
5.5 Preparing the Computer for Disassembly 1. Shut down the computer. 2. Disconnect the AC Adapter and all external devices connected to the computer. 3. Remove the battery pack from the battery bay (Section 5.6). CAUTION: Failure to disconnect the AC Adapter from the computer and remove the battery pack before removing and installing internal components can damage the equipment. 4. Remove the hard drive (Section 5.7). 5. Remove MultiBay devices (Section 5.8). NOTE: MultiBay devices other than MultiBay battery packs may be left inside the MultiBay to provide balance when the computer is open. If installed, remove the MultiBay battery pack. 6. Remove all PC Cards (Section 5.9). Removal and Replacement Procedures 5-5
Removal and Replacement Procedures
5-5
5.5
Preparing the Computer for Disassembly
1. Shut down the computer.
2. Disconnect the AC Adapter and all external devices connected to the computer.
3. Remove the battery pack from the battery bay (Section 5.6).
CAUTION:
Failure to disconnect the AC Adapter from the computer and remove the
battery pack before removing and installing internal components can damage the
equipment.
4. Remove the hard drive (Section 5.7).
5. Remove MultiBay devices (Section 5.8).
NOTE:
MultiBay devices other than MultiBay battery packs may be left inside the
MultiBay to provide balance when the computer is open. If installed, remove the
MultiBay battery pack.
6. Remove all PC Cards (Section 5.9).