Compaq Mini 110c-1000 HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1
Compaq Mini 110c-1000 - PC Manual
View all Compaq Mini 110c-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Compaq Mini 110c-1000 manual content summary:
- Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 1
HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 110 Maintenance and Service Guide - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 2
owned by its proprietor and used by Hewlett-Packard Company under license. Intel and Atom services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. First Edition: May 2009 Document Part - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 3
Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 4
iv Safety warning notice - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 5
Front components ...9 Right-side components ...11 Left-side components ...12 Display components ...13 Bottom components ...14 Wireless antennas ...15 3 Illustrated parts catalog Service tag ...16 Device major components ...17 Display assembly components ...21 Mass storage devices ...23 Miscellaneous - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 6
33 Component replacement procedures 34 Service tag ...34 Device feet ...35 Battery ...36 SIM ...37 Memory module ...38 Keyboard ...40 Navigating and selecting in the Setup Utility 71 Displaying system information 72 Restoring default settings in the Setup Utility 72 Exiting the Setup Utility - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 7
memory map Restoring your information 97 Using System Restore 98 Using HP Mi Restore Image Creator 98 Restoring using a Windows computer 98 Restoring using a Linux computer 99 Windows Vista backup and recovery XP backup and recovery 105 Backing up your information 105 Performing a recovery - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 8
10 Power cord set requirements Requirements for all countries and regions 112 Requirements for specific countries and regions 113 11 Recycling Battery ...114 Display ...114 Index ...120 viii - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 9
Graphics Panels Memory Description HP Mini 1101 HP Mini 110 NoteBook PC HP Mini 1101 NoteBook PC √ HP Mini 110 √ Compaq Mini 110 Intel® memory module slot Supports up to 2 GB of system memory √ √ PC2-4200, 533-MHz, DDR2 √ √ Supports the following configurations: Compaq Mini 110 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 10
● 512-MB total system memory (512 × 1) HP Mini 1101 HP Mini 110 NoteBook PC √ NOTE: Supported by computers with Windows® XP Home Edition Service Pack 3 only. ● 1024-MB total system memory √ √ (1024 × 1) ● 2048-MB total system memory √ √ (2048 × 1) NOTE: Supported by computers with Windows - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 11
) or √ √ Media Card Reader (commercial models) with push-push technology supporting: ● Memory Stick (MS) ● Memory Stick Pro (MSP) ● MultiMediaCard (MMC) ● Secure Digital (SD) Memory Card ● xD-Picture Card (XD) HP Mini Mobile Drive Bay (on models √ equipped with a solid-state drive) Two - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 12
1101 HP Mini 110 NoteBook PC Security Supports HP Kensington Security Lock √ √ Operating system Preinstalled: Windows® XP Home SP3, ultra low-cost √ personal computer (ULCPC) edition Windows Vista® Business 32 (with XP √ Pro image) HP Mobile Mi √ Serviceability End-user replaceable parts - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 13
2 External component identification Components included with the device may vary by region and model. The illustrations in this chapter identify the standard features on most device models. Top components TouchPad Component (1) Left TouchPad button (2) TouchPad (3) TouchPad scroll zone (4) - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 14
Light Component Caps lock light Description On: Caps lock is on. 6 Chapter 2 External component identification - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 15
Keys NOTE: Refer to the illustration that most closely matches your computer. Component (1) (2) (3) (4) Function keys fn key Windows® logo key Windows applications key Description Execute frequently used system functions when pressed in combination with the fn key. Executes frequently used system - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 16
Component (1) (2) (3) (4) Function keys fn key Home key Program Switcher key Description Execute frequently used system functions when pressed in combination with the fn key. Executes frequently used system functions when pressed in combination with a function key. Returns to the Home Screen. - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 17
switch (3) Drive light (4) Battery light Description ● On: The device is on. ● Blinking: The device is in the Sleep state (Windows Vista) or Standby (Windows XP or Mobile Mi). ● Off: The device is off or in Hibernation. ● When the device is off, slide the switch to turn on the device. ● When - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 18
Component (5) Wireless light (6) Wireless switch Description ● Blue: An integrated wireless device, such as a wireless local area network (WLAN) device, is on. ● Amber: All wireless devices are off. Turns the wireless feature on or off, but does not establish a wireless connection. NOTE: A - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 19
(2) Digital Media Slot (consumer models) or Media Card Supports the following optional digital card formats: Reader (commercial models) ● Memory Stick (MS) ● Memory Stick Pro (MSP) ● MultiMediaCard (MMC) ● Secure Digital (SD) Memory Card ● xD-Picture Card (3) External monitor port Connects - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 20
Left-side components Component (1) Security cable slot (2) Power connector (3) AC adapter light (4) Vent (5) USB port (6) Audio-out (headphone) jack/Audio-in (microphone) jack Description Attaches an optional security cable to the device. NOTE: The security cable is designed to act as - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 21
display is closed while the power is on. NOTE: The display switch is not visible from the outside of the device. Captures still photographs and videos. NOTE: To capture videos, you need to install additional webcam software. On: The webcam is in use. Records sound. Display components 13 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 22
Bottom components Component (1) Battery bay (2) Battery release latches (2) (3) Vent (4) Memory module compartment Description Holds the battery. Release the battery from the battery bay. Enables airflow to cool internal components. NOTE: The device fan starts up - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 23
Wireless antennas Component Description (1) WWAN antennas (2) (select models only)* Send and receive wireless signals to communicate with wireless wide-area networks (WWANs). (2) WLAN antennas (2)* NOTE: This option is not available on computers with Mobile Mi installed. Send and receive - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 24
information about the product's hardware components. The part number helps a service technician to determine what components and parts are needed. (4) Model description: This is the alphanumeric identifier used to locate documents, drivers, and support for the device. (5) Warranty period: This - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 25
transceivers/cables; WWAN is optional) See Display assembly components on page 21 for a comprehensive list of display assembly spare parts. For use with HP models only ● 10.1-inch, high-definition, AntiGlare Display Assembly (Includes WWAN) 572407-001 ● 10.1-inch, high-definition, AntiGlare - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 26
.1-inch, standard-definition, AntiGlare Display Assembly For use with Compaq models only ● 10.1-inch, high-definition, AntiGlare Display only in the United States For use only on models with Mobile Mi installed Spare part number 571414-001 537646-001 572414-001 571417-001 537643-001 535689-201 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 27
-state drive spare parts. Heat sink assembly (includes replacement thermal material) 537619-001 Fan 537613-001 USB/audio board (includes cable) 537614-001 Power/battery pass-through board 537615-001 Plastics/actuator Kit 537612-001 Power switch and wireless switch actuators Memory module - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 28
12) (13) (14) (15) (16) Description Spare part number ● For use in Afghanistan, Albania, Algeria, Memory module (PC2-5300, 533-MHz, DDR2) 512-MB (for use in HP Mini 110 and Compaq Mini 110 models only) 537663-001 1024-MB 537664-001 2048-MB (for use in HP Mini 1101 NoteBook PC, and HP Mini - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 29
Display assembly components Item Description Spare part number (1) Hinge covers (2) Display bezel 537617-001 For use with HP Mini 1101 NoteBook PC, and HP Mini 110 only For use with Compaq Mini 110 only (3) Display Hinge Kit 537650-001 537644-001 537658-001 (Includes left and right display - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 30
on computers with Mobile Mi installed.) (9) Display enclosure (includes logo) For use with the HP Mini 1101 Notebook PC, and HP Mini 110 For use with the Compaq Mini 110 Display Screw Kit (not illustrated) Spare part number 537655-001 537651-001 537645-001 538510-001 22 Chapter 3 Illustrated - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 31
, 5400-RPM Hard Drive Hardware Kit (not illustrated) (2) Solid-state drive 64-GB 32-GB 16-GB 8-GB Solid-state Drive Hardware Kit (not illustrated) Spare part number 537635-001 537634-001 537641-001 537640-001 537639-001 537638-001 537637-001 537642-001 Mass storage devices 23 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 32
Miscellaneous parts Description 30-W UMA AC adapter Bluetooth® adapter Power cords For South Korea For use in Switzerland For use in Taiwan Rubber Kit (contains 4 device feet) Screw Kit Spare part number 496813-001 574670-001 490371-D01 490371-011 490371-201 490371-AA1 490371-081 490371-021 490371- - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 33
Sequential part number listing Spare part number Description 483377-002 HP un2400 Mobile Broadband Module (select models only) 483377-003 HP un2400 Mobile Broadband Module for use with Verizon Wireless only (select models only) 490371-001 Power cord for use in North America 490371-011 Power - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 34
Spare part number Description 535689-001 Keyboard for use only in the United States on 4 rubber feet) 537612-001 Plastics/actuator kit (includes power switch and wireless switch actuators, memory module compartment cover, and bezel for Digital Media Slot (consumer models) or Media Card Reader - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 35
Spare part number 537613-001 537614 Compaq Mini 110 10.1-inch, standard-definition, AntiGlare Display Assembly for use with HP models only Display bezel for use with HP Mini 1101 NoteBook PC, and HP Mini 110 only Display enclosure (includes logo) for use with the HP Mini 1101 Notebook PC, and HP Mini - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 36
Spare part number 537663-001 537664-001 537665-001 538510-001 571370-001 571414-001 571417-001 571888-001 572405-001 572406-001 572407-001 572414-001 574670-001 Description 512-MB memory module (PC2-5300, 533-MHz, DDR2 for use in HP Mini 110 and Compaq Mini 110 models only) 1024-MB memory module ( - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 37
Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. Cables and connectors CAUTION: When servicing the device, be sure that cables are placed in their - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 38
Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the device, damage to a drive, or loss of information, observe these precautions: Before removing or inserting a hard drive, shut down the device. If you are unsure whether the device is off or - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 39
Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 40
and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ● When as ordinary plastic assembly aids and Styrofoam. ● Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items only - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 41
with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic bags, tubes, or boxes ● Metal tote boxes ● Electrostatic voltage levels and - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 42
information about the product's hardware components. The part number helps a service technician to determine what components and parts are needed. (4) Model description: This is the alphanumeric identifier used to locate documents, drivers, and support for the device. (5) Warranty period: This - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 43
Device feet The device feet are adhesive-backed rubber pads, tethered to the base enclosure. Description Rubber Kit Spare part number 537618-001 Component replacement procedures 35 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 44
Battery Description 6-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 55-Wh) 3-cell lithium-polymer (Li-Pol) battery (2.55-Ah, 28-Wh) Spare part number 537627-001 537626-001 Before disassembling the device, follow these steps: 1. Shut down the device. If you are unsure whether the device is off - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 45
SIM NOTE: This section applies only to device models with WWAN capability. NOTE: If there is a SIM inserted in the SIM slot, it must be removed before disassembling the computer. Be sure that the SIM is reinserted in the SIM slot after reassembling the computer. Before removing the SIM, follow - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 46
, 533-MHz, DDR2) 512-MB (for use in HP Mini 110 and Compaq Mini 110 only) 1024-MB 2048-MB (for use in HP Mini 1101 NoteBook PC, and HP Mini 110 with Mobile Mi installed only) Spare part number 537663-001 537664-001 537665-001 Before removing the memory module, follow these steps: 1. Shut down the - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 47
4. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. Reverse this procedure to install a memory module. Component replacement procedures 39 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 48
in Japan ● For use only in Latin America ● For use only in South Korea ● For use only in Taiwan 40 Chapter 4 Removal and replacement procedures Spare part number 535689-201 535689-221 535689-021 535689-DH1 535689-051 535689-121 535689-041 535689-151 535689-211 535689-B31 535689-BB1 535689-061 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 49
Description ● For use only in Thailand ● For use only in the United States Spare part number 535690-281 535690-001 Before removing the keyboard, follow these steps: 1. Shut down the device. If you are unsure whether the device is off - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 50
4. Insert a flexible tool into the opening, and then press inward to release the keyboard. 5. Turn the device right-side up, and then lift up on the top and left edges (1) of the keyboard until the keyboard releases completely. 6. Slide the keyboard back until its top edge rests on the display - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 51
8. Disconnect the cable (2), and then remove the keyboard. 9. Remove the keyboard. Reverse this procedure to install the keyboard. Component replacement procedures 43 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 52
RTC battery Description RTC battery Spare part number 537616-001 Before removing the real-time clock (RTC) battery, follow these steps: 1. Shut down the device. If you are unsure whether the device - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 53
, 5400-RPM 160-GB, 5400-RPM Hard Drive Hardware Kit Solid-state drive 64-GB 32-GB 16-GB 8-GB Solid-state Drive Hardware Kit Spare part number 537635-001 537634-001 537641-001 537640-001 537639-001 537638-001 537637-001 537642-001 Before removing the hard drive or solid-state - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 54
2. Use the Mylar tab to slide the assembly to the left (3) to disconnect it, and remove the assembly (4). Continue with one of the following sections for hard drive or solid-state drive replacement. Hard drive 1. Remove the 4 Phillips SP3.0×4.0 screws (1) that secure the hard drive bracket to the - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 55
2. Lift the solid-state drive (2) to remove it. Reverse this procedure to install a solid-state drive. Component replacement procedures 47 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 56
cover Description Top cover (includes TouchPad) Spare part number 537622-001 Before removing the top cover your device has WWAN capability, remove the SIM (see SIM on page 37. 6. Remove the memory module (see Memory module on page 38 7. Remove the keyboard (see Keyboard on page 40). 8. Remove the - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 57
6. Remove the 8 Phillips PM2.5×7.0 screws that secure the top cover to the base enclosure. 7. Lift the inside edge of the top cover (1) and swing it up. Then slide the top cover back slightly to rest against the display assembly (2) at an angle. 8. Release the ZIF connector (1) to which the TouchPad - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 58
9. Disconnect the TouchPad button board cable (2) from the system board, and then remove the top cover. Reverse this procedure to install the top cover. 50 Chapter 4 Removal and replacement procedures - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 59
WLAN module Description Spare part number Broadcom 4312 802.11/b/g WLAN module For use in and then receive a warning message, remove the module to restore device functionality, and then contact technical support through Help and Support. Before removing the WLAN module, follow these steps: 1. - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 60
Remove the WLAN module: 1. Remove the 2 Phillips PM2.0×4.0 screws (1) that secure the WLAN module to the system board. (The edge of the module opposite the slot rises away from the device.) 2. Disconnect the wireless antenna cables (2) from the terminals on the WLAN module. 3. Remove the WLAN module - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 61
HP un2400 Mobile Broadband Module (select models only) HP un2400 Mobile Broadband Module for use only with Verizon Wireless (select models only) WWAN module for use only in China Spare part remove the module to restore device functionality, and then contact technical support. Before removing the - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 62
3. Remove the WWAN module (3) by pulling the module away from the slot at an angle. Reverse this procedure to install the WWAN module. 54 Chapter 4 Removal and replacement procedures - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 63
USB/audio board Description USB/audio board (includes cable) Spare part number 537614-001 Before removing the USB/audio board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 64
Power/battery pass-through board Description Power/battery passthrough board Spare part number 537615-001 Before removing the power/battery pass-through board, follow these steps: 1. Shut down the device. If you are unsure whether the device - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 65
Fan Description Fan Spare part number 537613-001 NOTE: To properly ventilate the device, allow at least a 7.6-cm (3-inch) clearance on the left side of the device. The device uses - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 66
3. Remove the fan (3). Reverse this procedure to install the fan. 58 Chapter 4 Removal and replacement procedures - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 67
Heat sink assembly Description Heat sink assembly (includes replacement thermal material) Spare part number 537619-001 Before removing the heat sink assembly, follow these steps: 1. Shut down the device. If you are unsure whether the device is off - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 68
on the processor (1), and thermal tape is used on the Northbridge chip (2). Replacement thermal material is included with all heat sink assembly and system board spare part kits. Reverse this procedure to install the heat sink assembly. 60 Chapter 4 Removal and replacement procedures - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 69
System board Description Spare part number System board (includes processor and replacement thermal material) Includes Intel Atom N280 1.66-GHz processor, 512-KB Level 2 cache, 533-MHz front-side bus ( - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 70
2. Disconnect the following cables from the system board: (2) Display panel cable (3) Microphone cable (4) Speaker cable (5) WLAN cables (6) WWAN cables (select models only) 3. Remove the 2 Phillips PM1.5×2.0 screws (1) that secure the actuators for the power switch and wireless on/off switch to the - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 71
5. Remove the 3 Phillips PM2.5×5.0 screws that secure the system board to the base enclosure. 6. Grasp the system board at the midpoint of the left side (1), and lift it up. 7. Pull the system board (2) out to the left at an angle to remove it. 8. Remove the system board. Reverse the procedure to - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 72
on page 21 for a comprehensive list of display assembly spare parts. For use with HP models only ● 10.1-inch, high-definition, AntiGlare Display (includes logo) For use with the HP Mini 1101 Notebook PC, and HP Mini 110 For use with the Compaq Mini 110 Display Screw Kit (not illustrated) 537655 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 73
Display panel cable (3) Microphone cable (4) Speaker cable (5) WLAN cables (6) WWAN cables (select models only) CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other device components - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 74
3. Remove the 4 Phillips PM2.5×5.0 screws (1) that secure the display assembly to the device. NOTE: One screw on the left hinge (2) also secures the display panel cable ground strap. 4. Remove the display assembly. 5. If it is necessary to replace the display bezel, perform the following steps: a. - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 75
6. If it is necessary to replace the display panel, perform the following steps: a. Remove the 7 Phillips PM2.0×3.0 screws that secure the display panel to the display enclosure. b. Lift the display panel up from the display enclosure (1). c. Disconnect the webcam cable (2) from the system board (2) - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 76
b. Remove the speaker assembly (2). 8. If it is necessary to replace the display hinges, perform the following steps: a. Remove the 2 Phillips PM2.0×3.0 screws (1) that secure each hinge to the display enclosure. b. Remove the hinges (2). 9. If it is necessary to replace the display panel cable, - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 77
b. Disconnect the display panel cable (2). 10. If it is necessary to replace the webcam module, perform the following steps: a. Disconnect the webcam cable (1) from the webcam. b. Remove the webcam (2). 11. If it is necessary to replace the microphone receiver, perform the following steps: a. - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 78
b. Pull the receiver through the tabs (2), and remove the microphone receiver (3). 12. If it is necessary to replace the wireless antenna transceivers and cables, detach the cables from the adhesive (1) that secures them to the display enclosure, and then remove the cables (2). Reverse this - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 79
or restarting the device, and then pressing f10 while the "F10 = BIOS Setup Options" message is displayed in the lower-left corner of the Utility Because the Setup Utility is not operating system-based, it does not support the TouchPad. Navigation and selection are by keystroke. ● To choose a menu - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 80
how to restore the Setup Utility default settings. If the Setup Utility is not already running, begin at step 1. If the Setup Utility is already running, begin at step 2. 1. Open the Setup Utility by turning on or restarting the device, and then pressing f10 while the "F10 = BIOS Setup Options - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 81
Some of the Setup Utility menu items listed in this chapter may not be supported by your device. Main menu Select System information To do this ● View and memory size, and system BIOS. Security menu Select Administrator password Power-On Password System Configuration menu Select Language Support - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 82
Diagnostics menu Select Hard Disk Self Test (select models only) Memory Test To do this Run a comprehensive self-test on the hard drive. Run a diagnostic test on the system memory. 74 Chapter 5 Setup Utility - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 83
, equipped with a 3-cell battery, hard drive, 1-GB 1.11 kg memory, WLAN module, and 2 wireless antennas 10.1-in. LCD, equipped with a 3-cell battery ,solid-state drive, 1.09 kg 1-GB memory, WLAN module, and 2 wireless antennas U.S. 6.56 in 10.30 in 0.99 in 2.45 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 84
10.1-inch, AntiGlare display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 23.45 cm 14.30 cm 25.55 cm 262,144 400:1 (typical) 200 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 85
referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. Hard drive specifications 77 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 86
Solid-state drive specifications Performance Transfer modes supported Sustained read Sustained write Characteristics Interface MLC NAND flash capacity Electrical specifications DC supply voltage Standby current Active current Environmental specifications Operating temperature Storage temperature - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 87
System DMA specifications Hardware DMA DMA0 DMA1 * DMA2 * DMA3 DMA4 System function Not applicable Not applicable Not applicable Not applicable Direct memory access controller System DMA specifications 79 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 88
/g WLAN no. 2 Intel 82801G (ICH7 Family) PCI Express Root Port-27D0 Intel 82801G (ICH7 Family) USB Universal Host Controller-27CB Microsoft UAA Bus Driver for High Definition Audio Mobile Intel 945 Express Chipset Family Intel 82801G (ICH7 Family) PCI Express Root Port-27D2 Intel 82801G (ICH7 Family - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 89
System I/O address specifications I/O address (hex) 000 - 00F 000 - CF7 010 - 01F 020 - 021 022 - 03F 040 - 043 044 - 05F 060 - 060 061 - 061 062 - 062 063- 063 064 - 064 065 - 065 066 - 066 067 - 06F 070 - 071 072 - 07F 080 - 080 081 - 083 084 - 086 087 - 087 088 - 088 089 - 08B 08C - 08E 08F - - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 90
I/O address (hex) 279 - 279 3B0 - 3BB 3C0 - 3DF 3F6 - 3F6 400 - 41F 480 - 4BF 4D0 - 4D1 500 - 501 800 - 87F A79 - A79 0D00 - FFFF D480 - D49F D800 - D81F D880 - D89F DC00 - DC1F DC80 - DC87 E000 - EFFF FFA0 - FFAF System function (shipping configuration) ISAPNP Read Data Port Mobile Intel® 945 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 91
System memory map specifications Memory address 00000000 - 0009FFFF 000A0000 - 000BFFFF 000A0000 - 000BFFFF 000C0000 - 000CFFFF 000D0000 - 82801G (ICH7 Family) USB2 Enhanced Host Controller-27CC Microsoft® UAA Bus Driver for High Definition Audio Mobile Intel 945 Express Chipset Family Mobile Intel - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 92
and screw locks used in the device. All screws listed in this section are available in the Screw Kit, spare part number 537620-001; or in the Display Screw Kit, spare part number 538510-001. Phillips PM1.5×1.0 screw Color Silver Quantity 6 Length 1.0 mm Thread 1.5 mm Head diameter 1.0 mm Where - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 93
Where used: Two screws that secure the power and wireless switch actuators to the base enclosure Phillips PM1.5×1.0 screw 85 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 94
Phillips PM2.0×3.0 screw Color Black Quantity 20 Length 3.0 mm Thread 2.0 mm Head diameter 4.0 mm Where used: 3 screws that secure the keyboard to the device Where used: Four screws that secure the solid-state drive to the bracket 86 Chapter 7 Screw listing - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 95
Where used: Seven screws that secure the display panel to the display enclosure Where used: Three screws that secure the speaker assembly to the display enclosure Where used: Four screws that secure the hinges to the display panel Phillips PM2.0×3.0 screw 87 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 96
Phillips PM2.0×3.0 captive screw Color Black Quantity 2 Length 3.0 mm Thread 2.0 mm Head diameter 4.0 mm 88 Chapter 7 Screw listing - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 97
Phillips PM2.0×4.0 screw Color Silver Quantity 4 Length 4.0 mm Thread 2.0 mm Head diameter 4.0 mm Where used: Two screws that secure the WLAN module to the system board Where used: Two screws that secure the WWAN to the system board Phillips PM2.0×4.0 screw 89 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 98
Phillips PM2.0×5.0 screw Color Silver Quantity 3 Length 5.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: Two screws that secure the hard drive or solid-state drive to the system board Where used: One screw that secures the top cover to the base enclosure 90 Chapter 7 Screw listing - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 99
Phillips PM2.5×5.0 screw Color Silver Quantity 15 Length 5.0 mm Thread 2.5 mm Head diameter 4.5 mm Where used: Two screws that secure the power/battery passthrough board to the system board Where used: Four screws that secure the display assembly and top cover to the device Phillips PM2.5×5.0 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 100
Where used: Two screws that secure the fan to the system board Where used: Three screws that secure the system board to the base enclosure Where used: Four screws that secure the display assembly to the base enclosure 92 Chapter 7 Screw listing - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 101
Phillips PM2.5×7.0 screw Color Black Quantity 12 Length 7.0 mm Thread 2.5 mm Head diameter 4.0 mm Where used: Four screws that secure the top cover to the base enclosure Where used: Eight screws that secure the top cover to the base enclosure Phillips PM2.5×7.0 screw 93 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 102
Phillips PM2.5×10.0 captive screw Color Black Quantity 1 Length 10.0 mm Thread 2.5 mm Head diameter 4.0 mm Where used: One captive screw, with a C-clip, that secures the hard drive or solid-state drive bracket to the system board 94 Chapter 7 Screw listing - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 103
Phillips PM3.0×40.0 screw Color Black Quantity 4 Length 4.0 mm Thread 3.0 mm Head diameter 4.0 mm Where used: Four screws that secure the hard drive bracket to the hard drive Phillips PM3.0×40.0 screw 95 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 104
8 Backup and recovery Select the section in this chapter that applies to the operating system installed on your computer. 96 Chapter 8 Backup and recovery - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 105
, and if you are unable to use System Restore, you can use another computer to download the HP Mi Restore Image Creator utility and create a bootable USB flash drive (purchased separately). You can then use the USB flash drive to install the HP Mi recovery image and programs on your device. Note the - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 106
the Support & Drivers tab. 3. Under "Step 1: Start by selecting a task," select Download drivers and software (and firmware) . 4. Under "Step 2: Enter a product name / number," type the part number/product number (p/n) of your Mini, and then click Go. NOTE: The p/n is located on the service tag - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 107
be deleted manually.) Restoring using a Linux computer To download the files to a computer running a Linux operating system and then restore your device, follow these steps: 1. From your Linux computer, go to http://www.hp.com. 2. Click the Support & Drivers tab. Mobile Mi backup and recovery 99 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 108
the command prompt: sudo liveusb-creator 12. Select Download restore image/HP Mi Restore Image. 13. Select the target USB flash drive, and then click Start to download the latest Mini recovery image from the HP Web site. The recovery image will be downloaded and saved to the Linux computer, and then - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 109
with double-layer (DL) support store more information than CDs, so using them for backup reduces the number of recovery discs required. ● When Start > All Programs > Maintenance > Backup and Restore Center. 2. Follow the on-screen instructions to back up your entire computer (select models only - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 110
and Support for more information. Performing a recovery In case recovery tools: You can use the Backup and Restore Center to recover information you have previously backed up. You can also use Windows Startup Repair to fix problems that might prevent Windows from starting correctly. ● f11 recovery - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 111
process restores the operating system, as well as the drivers, software, and utilities from the backup used for recovery. 1. If possible, back up all personal files. 2. If possible, check for the presence of the Windows partition and the HP Recovery partition. To find the partitions, select Start - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 112
://www.hp.com/support, select your country or region, and follow the on-screen instructions. You can also order the DVD by calling technical support. For complete, the recovery process helps you restore the operating system, as well as drivers, software, and utilities. To initiate recovery using a - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 113
and folders ● Scheduling automatic backups ● Creating recovery points ● Recovering information NOTE: For detailed instructions, perform a search for these topics in Help and Support. NOTE: In case of system instability, HP recommends that you print the recovery procedures and save them for later use - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 114
> Backup. The Backup or Restore Wizard opens. 3. Click Restore files and settings, and then click Next. 4. Follow the on-screen instructions. NOTE: For additional information on initiating a recovery in Windows, perform a search for this topic in Help and Support. Recovering the operating system and - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 115
9 Connector pin assignments Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-in (microphone) 107 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 116
Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground 108 Chapter 9 Connector pin assignments - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 117
External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9 +5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock External monitor 109 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 118
RJ-45 (network) Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused 110 Chapter 9 Connector pin assignments - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 119
Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground Universal Serial Bus 111 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 120
10 Power cord set requirements The wide range input feature of the device permits it to operate from any line voltage from 100 to 120 volts AC or from 220 to 240 volts AC. The 3-conductor power cord set included with the device meets the requirements for use in the country or region where the - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 121
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 The Netherlands - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 122
remove these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that site at http://www.eiae.org. This section provides disassembly instructions for the display assembly. The display assembly must be disassembled - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 123
Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 124
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel assembly upside - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 125
10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel right-side up. Display 117 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 126
15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 17. Remove the - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 127
18. Remove the backlight from the backlight frame. 19. Disconnect the display panel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 128
compartments, memory module 14 components bottom 14 display 13 front 9 left-side 12 right-side 11 TouchPad 5 connectors service considerations 29 D device feet locations 35 spare part number 35 device specifications 75 Diagnostics menu 74 Digital Media Slot, identifying 11 discs Driver Recovery 106 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 129
2 spare part number 19 specifications 77 hard drive recovery 104 hard drive self test 74 headphone (audio-out) jack 12 headphone jack pin assignments 108 headphones 12 heat sink assembly removal 59 spare part number 59 hinge covers illustrated 21, 64 spare part number 21, 64 Home key 8 HP Mi Restore - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 130
Configuration menu 73 system DMA 79 system information 73 system memory map 83 System Restore identifying 97 using 98 S Screw Kit contents 84 spare part number 24 T tools required 29 top cover removal 48 spare part number 19, 48 TouchPad buttons 5 identifying 5 TouchPad scroll zone, identifying - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 131
WWAN module removal 53 spare part number 53 Index 123 - Compaq Mini 110c-1000 | HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 132
HP Mini 1101 Notebook PC, HP Mini 110, and
Compaq Mini 110
Maintenance and Service Guide