Compaq Mini 110c-1000 HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 74

Remove the 4 Phillips PM2.5×5.0 screws, Remove the display hinge covers

Get Compaq Mini 110c-1000 - PC PDF manuals and user guides View all Compaq Mini 110c-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

3. Remove the 4 Phillips PM2.5×5.0 screws (1) that secure the display assembly to the device. NOTE: One screw on the left hinge (2) also secures the display panel cable ground strap. 4. Remove the display assembly. 5. If it is necessary to replace the display bezel, perform the following steps: a. Remove the display hinge covers (1). b. Flex the inside edges of the top and bottom (2), and then the left and right sides (3) of the display bezel until the bezel disengages from the display enclosure. c. Remove the display bezel (4). 66 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
3.
Remove the 4 Phillips PM2.5×5.0 screws
(1)
that secure the display assembly to the device.
NOTE:
One screw on the left hinge
(2)
also secures the display panel cable ground strap.
4.
Remove the display assembly.
5.
If it is necessary to replace the display bezel, perform the following steps:
a.
Remove the display hinge covers
(1)
.
b.
Flex the inside edges of the top and bottom
(2)
, and then the left and right sides
(3)
of the
display bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel
(4)
.
66
Chapter 4
Removal and replacement procedures