Compaq Mini 110c-1000 HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 75
If it is necessary to replace the speaker assembly, perform the following steps
View all Compaq Mini 110c-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
6. If it is necessary to replace the display panel, perform the following steps: a. Remove the 7 Phillips PM2.0×3.0 screws that secure the display panel to the display enclosure. b. Lift the display panel up from the display enclosure (1). c. Disconnect the webcam cable (2) from the system board (2) d. Remove the display panel (3) from the display enclosure. 7. If it is necessary to replace the speaker assembly, perform the following steps: a. Remove the three Phillips PM2.0×3.0 screws (1) that secure the speaker assembly to the display enclosure. Component replacement procedures 67
6.
If it is necessary to replace the display panel, perform the following steps:
a.
Remove the 7 Phillips PM2.0×3.0 screws that secure the display panel to the display
enclosure.
b.
Lift the display panel up from the display enclosure
(1)
.
c.
Disconnect the webcam cable
(2)
from the system board
(2)
d.
Remove the display panel
(3)
from the display enclosure.
7.
If it is necessary to replace the speaker assembly, perform the following steps:
a.
Remove the three Phillips PM2.0×3.0 screws
(1)
that secure the speaker assembly to the
display enclosure.
Component replacement procedures
67