Compaq Mini 110c-1000 HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 61

WWAN module

Get Compaq Mini 110c-1000 - PC PDF manuals and user guides View all Compaq Mini 110c-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 61 highlights

WWAN module NOTE: Not available for computers with Mobile Mi installed. Description HP un2400 Mobile Broadband Module (select models only) HP un2400 Mobile Broadband Module for use only with Verizon Wireless (select models only) WWAN module for use only in China Spare part number 483377-002 483377-003 571888-001 CAUTION: The WWAN module and the WLAN module are not interchangeable. To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the device by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WWAN module, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 36). 5. Remove the SIM (see SIM on page 37. 6. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 45) c. Top cover (see Top cover on page 48) Remove the WWAN module: 1. Remove the 2 Phillips PM2.0×4.0 screws (1) that secure the WWAN connector module (3) to the system board. (The edge of the module opposite the slot rises away from the device.) 2. Disconnect the wireless antenna cables (2) from the terminals on the WWAN module. NOTE: The red WWAN antenna cable is connected to the WWAN module "Main" terminal. The blue WWAN antenna cable is connected to the WWAN module "Aux" terminal. Component replacement procedures 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
WWAN module
NOTE:
Not available for computers with Mobile Mi installed.
Description
Spare part number
HP un2400 Mobile Broadband Module (select models only)
483377-002
HP un2400 Mobile Broadband Module for use only with Verizon Wireless (select models only)
483377-003
WWAN module for use only in China
571888-001
CAUTION:
The WWAN module and the WLAN module are not interchangeable.
To prevent an unresponsive system, replace the wireless module only with a wireless module authorized
for use in the device by the governmental agency that regulates wireless devices in your country or
region. If you replace the module and then receive a warning message, remove the module to restore
device functionality, and then contact technical support.
Before removing the WWAN module, follow these steps:
1.
Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device
on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the device.
3.
Disconnect the power from the device by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the device.
4.
Remove the battery (see
Battery
on page
36
).
5.
Remove the SIM (see
SIM
on page
37
.
6.
Remove the following components:
a.
Keyboard (see
Keyboard
on page
40
)
b.
Hard drive or solid-state drive (see
Mass storage devices
on page
45
)
c.
Top cover (see
Top cover
on page
48
)
Remove the WWAN module:
1.
Remove the 2 Phillips PM2.0×4.0 screws
(1)
that secure the WWAN connector module
(3)
to the
system board. (The edge of the module opposite the slot rises away from the device.)
2.
Disconnect the wireless antenna cables
(2)
from the terminals on the WWAN module.
NOTE:
The red WWAN antenna cable is connected to the WWAN module “Main” terminal. The
blue WWAN antenna cable is connected to the WWAN module “Aux” terminal.
Component replacement procedures
53