Compaq Mini 110c-1000 HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 56
Top cover, Remove the four Phillips PM2.5×7.0 screws
View all Compaq Mini 110c-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Top cover Description Top cover (includes TouchPad) Spare part number 537622-001 Before removing the top cover, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 36). 5. If your device has WWAN capability, remove the SIM (see SIM on page 37. 6. Remove the memory module (see Memory module on page 38 7. Remove the keyboard (see Keyboard on page 40). 8. Remove the hard drive or solid-state drive assembly (see Mass storage devices on page 45). Remove the top cover. 1. Turn the device upside down, with the front toward you. 2. Use a thin, flat tool to release the 4 tethered rubber feet. 3. Remove the four Phillips PM2.5×7.0 screws (1), and the Phillips SP2.0×5.0 screw (2) that secure the top cover to the base enclosure. 4. Turn the device right-side up, with the front toward you. 5. Open the device as far as possible. 48 Chapter 4 Removal and replacement procedures