Compaq Mini 110c-1000 HP Mini 1101 Notebook PC, HP Mini 110, and Compaq Mini 1 - Page 64
Power/battery pass-through board, Remove the 2 Phillips BP2.5×5.0 screws
View all Compaq Mini 110c-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Power/battery pass-through board Description Power/battery passthrough board Spare part number 537615-001 Before removing the power/battery pass-through board, follow these steps: 1. Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the device. 3. Disconnect the power from the device by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the device. 4. Remove the battery (see Battery on page 36). 5. If your device has WWAN capability, remove the SIM (see SIM on page 37. 6. Remove the following components: a. Keyboard (see Keyboard on page 40) b. Hard drive or solid-state drive (see Mass storage devices on page 45) c. Top cover (see Top cover on page 48) Remove the power/battery pass-through board: 1. Disconnect the power cable (1). 2. Remove the 2 Phillips BP2.5×5.0 screws (2) that secure the power/battery passthrough board to the base enclosure. 3. Remove the power/battery pass-through board (3). Reverse this procedure to install the power/battery pass-through board. 56 Chapter 4 Removal and replacement procedures