Compaq Presario A900 Compaq Presario A900 Notebook PC - Maintenance and Servic - Page 59
Flex the inside edges of the left and right sides, for camera module removal information.
View all Compaq Presario A900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
4. Lift the display assembly (2) straight up and remove it. 5. If it is necessary to replace the display bezel or the display assembly internal components, remove the following: (1) Four rubber screw covers on the display bezel top edge. The rubber screw covers are included in the Rubber Kit, spare part number 462397-001. (2) Two rubber screw covers on the display bezel bottom corners. (3) Two rubber screw covers on the display bezel bottom edge. (4) Eight Phillips PM2.5×7.0 screws that secure the display bezel to the display assembly. NOTE: See Camera module on page 35 for camera module removal information. 6. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display bezel until the bezel disengages from the display enclosure. Component replacement procedures 51