Compaq Presario CQ56-100 Getting Started - Windows 7 - Page 34
Installing the hard drive, to the system board, and then replace the three screws
View all Compaq Presario CQ56-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
11. Remove the hard drive (4) from the hard drive bay. Installing the hard drive To install the hard drive: 1. Grasp the tabs (1) on the hard drive and lower the hard drive (2) into the hard drive bay, then press down on the hard drive to be sure that the drive is firmly seated. 2. Connect the hard drive cable (3) to the system board, and then replace the three screws (4) that secure the hard drive to the computer. 3. Align the tabs (1) on the hard drive cover with the notches on the computer. 4. Close the cover (2). 28 Chapter 5 Maintenance
11.
Remove the hard drive
(4)
from the hard drive bay.
Installing the hard drive
To install the hard drive:
1.
Grasp the tabs
(1)
on the hard drive and lower the hard drive
(2)
into the hard drive bay, then press
down on the hard drive to be sure that the drive is firmly seated.
2.
Connect the hard drive cable
(3)
to the system board, and then replace the three screws
(4)
that
secure the hard drive to the computer.
3.
Align the tabs
(1)
on the hard drive cover with the notches on the computer.
4.
Close the cover
(2)
.
28
Chapter 5
Maintenance