Compaq ProLiant 8500 Compaq Parallel Database Cluster Model PDC/05000 for Orac - Page 172
controller, port 1, SVR1TOP2, SVR1BOT1, and SVR1BOT2., Rename
View all Compaq ProLiant 8500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
6-18 Compaq Parallel Database Cluster Model PDC/O5000 for Oracle8i and Windows 2000 Administrator Guide 10. From CLI, use the Rename command to rename the connections between the host adapter and the ports on each storage subsystem array controller. When you replaced the host adapter, the connection names you defined were replaced by default connection names for the new host adapter. For example, if you have one storage subsystem, there is a connection between the host adapter and the two ports on each of two array controllers. If you followed the recommendations for naming the connections for the old host adapter, they were SVR1TOP1 (node 1, top controller, port 1), SVR1TOP2, SVR1BOT1, and SVR1BOT2. To rename the default connection names for the new host adapter using the connections you previously defined for the old host adapter, you would enter: Rename defaultname SVR1TOP1 Rename defaultname SVR1TOP2 Rename defaultname SVR1BOT1 Rename defaultname SVR1BOT2 11. If you have configured the I/O paths for dual redundancy, make sure that the offsets defined for the connections between the host adapter and port 2 on each array controller are the same as offsets you defined when the storageset was originally configured. NOTE: If you have configured the I/O paths for quad redundancy, skip this step (no offsets are defined). 12. Restart the node. 13. Using Disk Management, verify that the storageset configuration seen from the node in which the host adapter was replaced is the same as the configuration seen from other nodes in the cluster. 14. Start the Oracle services and Oracle instance on the cluster node.