Creative Outlier User Guide - Page 7

Button 3. Next, Forward / Previous, Backward / 4. Mode Selector Light Indicator 5. Right earcup indicator Function Press to change to the next or previous track. Press and hold to scroll forward or backward a track (device dependent). Slide switch to enable playback from either a wireless Bluetooth device ( ), stored tracks in microSD media (microSD Audio) or tracks from a USB connected computer (USB Audio). Function Blue and blinks rapidly: in pairing mode and is ready to pair with a new device. Blue and blinks moderately: automatically searching and attempts to connect to the last paired device. Blue and blinks slowly: connected to a paired device. Blue and flashes once: successfully cleared all paired devices. Green: in microSD Audio or USB Audio mode. Green and flashes twice: selected microSD Audio / Play All mode. Green and flashes randomly: selected microSD Audio / Shuffle mode. Connector / Port 6. microSD slot 7. Micro-USB charging connector 8. Audio Input connector (3.5mm / ⅛") Green and blinks thrice: low battery level in microSD Audio or USB Audio mode, charge the headset soonest. Red and Blue blink alternately: low battery level in Bluetooth mode, charge the headset soonest. Red and flashes once: powering off the headset. Red: charging headset. This goes off when headset is fully charged. Note: the light indicator may appear as a combination of above colors and behavior depending on functionality. Function Insert a TF or microSD memory card for stored music playback. Press once to secure the card in the slot and press again to eject the card. Use the supplied USB cable for charging the headset via a laptop or computer. Also for USB Audio connection. Use a stereo audio cable (available separately) for a wired connection to a non-wireless device or when battery power runs out. In this mode, Bluetooth, microSD Audio and USB Audio connections will be disabled.