D-Link DCS-1000 Product Manual - Page 12
Basic Hardware Set-up Diagram, Sensor, 1 Passive Sensor Magnetic Switch - camera
View all D-Link DCS-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Basic Hardware Set-up Diagram The diagram below shows the hardware configuration for 1 Active Sensor (PIR Motion Sensor), 1 Passive Sensor (Magnetic Switch), and 1 output (For Relay) for a siren. Passive Component Notes!!! Only simple magnetic or contact switches can be used for Passive components. This limitation is because the camera only supplying 5V and less then 100mA current to those circuits. Distance for passive components is limited by a viewable camera range of about 25 Ft using 26GA wire. Active Component Notes!!! A separate power supply is needed for these devices. In order to choose the proper PS. The total current draw by all the components cannot exceed the Max current supplied by the power supply. Example Our PIR Motion Detector = 17 mA = .017A Our Relay = 60 mA = .06A Siren = 200mA = .20A Total : .277A Purchase a 12V DC 1.2A Max power adapter to cover all Active Sensors and Siren, with room to grow. 12