D-Link DCS-1000 Product Manual - Page 6

Connections, Network Cable Connector, DC Power Connector, Reset Button - default ip

Get D-Link DCS-1000 PDF manuals and user guides View all D-Link DCS-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Connections Antenna Connectors Ethernet Cable Connector Slide Switch DC Power Connector Reset Button I/O Connector Network Cable Connector The Internet Camera's rear panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5 twisted-pair cable). The port supports the NWay protocol, allowing the Internet Camera to automatically detect or negotiate the transmission speed of the network. DC Power Connector The DC power input connector is located on the Internet Camera's rear panel and is labeled DC 5V with a single jack socket to supply power to the Internet Camera. Reset Button Reset will be initiated when the reset button is pressed once and Power LED begins to flash. Factory Reset will be initiated when the reset button is pressed continuously for three seconds or when Power LED begins to light up. Release the reset button and the Power LED will begin to flash indicating that the Internet Camera's settings are reverting back to the factory settings. When factory reset is completed the Internet Camera will be set to default on channel 11 and ESS-ID is set as "NULL String." (This default setting will let the Internet Camera connect to ANY access point on the infrastructure network.) The IP address will also return to the default setting of 192.168.0.20. 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
6
Connections
Network Cable Connector
The Internet Camera’s rear panel features an RJ-45 connector for connections to
10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be
Category 5 twisted-pair cable). The port supports the NWay protocol, allowing the
Internet Camera to automatically detect or negotiate the transmission speed of the
network.
DC Power Connector
The DC power input connector is located on the Internet Camera’s rear panel and is
labeled
DC 5V
with a single jack socket to supply power to the Internet Camera.
Reset Button
Reset will be initiated when the reset button is pressed once and Power LED begins to
flash.
Factory Reset will be initiated when the reset button is pressed continuously for three
seconds or when Power LED begins to light up. Release the reset button and the
Power LED will begin to flash indicating that the Internet Camera’s settings are reverting
back to the factory settings. When factory reset is completed the Internet Camera will
be set to default on channel 11 and ESS-ID is set as “NULL String.” (This default
setting will let the Internet Camera connect to ANY access point on the infrastructure
network.) The IP address will also return to the default setting of 192.168.0.20.
Antenna Connectors
Ethernet Cable
Connector
Reset Button
Slide Switch
DC Power Connector
I/O Connector