D-Link DCS-1000 Product Manual - Page 23
System Administration - Image, Save/Cancel, Web Server, Open a second port - driver
View all D-Link DCS-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Instructions for installing ActiveX from the driver CD is included in this manual. Refer to the section labeled Software Installation. Open a second port: The Web Server field allows settings to open a second port for the Internet Camera. This will permit users IP Sharing Gateways to support multiple Internet Cameras. By default Port 80 is always opened for Internet Camera Web Server access. Select Yes and input the second port value. You can open the second port for each Internet Camera from port 81 to Port 85 as illustrated below: Internet Camera 1 - IP 192.168.0.101, second web port 81 Internet Camera 2 - IP 192.168.0.102, second web port 82 Internet Camera 3 - IP 192.168.0.103, second web port 83 Internet Camera 4 - IP 192.168.0.104, second web port 84 Internet Camera 5 - IP 192.168.0.105, second web port 85 You also need to setup your DSL gateway for Port Mapping. Port 81 map to 192.168.0.101 Port 82 map to 192.168.0.102 Port 83 map to 192.168.0.103 Port 84 map to 192.168.0.104 Port 85 map to 192.168.0.105 The Transfer Image field allows settings to open a second port for the Internet Camera to transfer images. The default Port "8481" is open image transfer and you can define a second port similar to above. Save/Cancel: After making sure all settings in the System are correct, click on the Save icon to store the settings in the Internet Camera. You can alternatively click on the Cancel icon to restore all settings to the values last saved to or retrieved from the Internet Camera. System Administration - Image The Image menu in the system administration contains commands to provide the settings for the images captured by the Internet Camera. Click on Image in the system administration menu bar and the Image screen will appear as shown in the following illustration: 23