D-Link DCS-2132L User Manual - Page 21

Mount the Camera

Get D-Link DCS-2132L PDF manuals and user guides View all D-Link DCS-2132L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Section 2: Installation Mount the Camera We suggest that you configure the camera before mounting. 1. Place the mounting base where you want to position the camera and use a pencil 1 to mark the holes. 2. Depending on the material of the wall or ceiling, use proper tools to drill two holes 2 or screws where you marked. If the wall is made out of concrete, drill the holes first, insert the plastic anchors and then the screws. The space between the camera and the screwheads should be 3mm. 3. Place the mounting base over the screw that is mounted on the wall. Make sure to 3 fit the screw-heads over the big holes and slide it downward to lock firmly. Lightly pull the base forward to make sure that it is locked. 4. Place the base cover on the base and screw the camera stem clockwise into the 4 mounting base. 5. Adjust the angle of the camera as desired, then tighten the collar on the camera 5 stem to lock it in place. D-Link DCS-2132L User Manual 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
21
D-Link DCS-2132L User Manual
Section 2: Installation
1. Place the mounting base where you want to position the camera and use a pencil
to mark the holes.
4. Place the base cover on the base and screw the camera stem clockwise into the
mounting base.
2. Depending on the material of the wall or ceiling, use proper tools to drill two holes
or screws where you marked. If the wall is made out of concrete, drill the holes first,
insert the plastic anchors and then the screws.
3. Place the mounting base over the screw that is mounted on the wall. Make sure to
fit the screw-heads over the big holes and slide it downward to lock firmly. Lightly
pull the base forward to make sure that it is locked.
The space between the camera and the screwheads should be 3mm.
We suggest that you configure the camera before mounting.
1
2
3
4
5. Adjust the angle of the camera as desired, then tighten the collar on the camera
stem to lock it in place.
5
Mount the Camera