D-Link DCS-2132L User Manual - Page 38
Enable CoS, Enable IPv6, Enable Multicast for stream - support
View all D-Link DCS-2132L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Section 4: Configuration Enable CoS: Enabling CoS (Class of Service) implements assignment of priority using a best-effort policy. This means without making any bandwidth reservations, so there is no guarantee of level of service. Enable QoS: Enabling QoS (Quality of Service) allows you to specify a traffic priority policy to ensure a consistent Quality of Service during busy periods. If the DCS-2132L is connected to a router that itself implements QoS, the router's settings will override the QoS settings of the camera. Enable IPv6: Enabling the IPv6 setting allows you to use the IPv6 protocol. Check the box to manually set up the IP address, specify an optional IP address, an optional default router and an optional primary DNS. Note: This setting only works if your network and hardware support IPv6 protocol. Enable Multicast for stream: The DCS-2132L gives you the ability to multicast each of the available streams via group address and specify the TTL value for each stream. If you do not want to use the default settings, enter the port and TTL settings you prefer to use. D-Link DCS-2132L User Manual 38