D-Link DCS-2132L User Manual - Page 39

Wireless Setup, Enable Wireless, Site Survey, Wireless Mode, Channel, Authentication, Encryption - how to setup d link

Get D-Link DCS-2132L PDF manuals and user guides View all D-Link DCS-2132L manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Section 4: Configuration Wireless Setup This section allows you to set up and configure the wireless settings on your camera. After making any changes, click Save Settings. Enable Wireless: Check the box to Enable Wireless. Site Survey: Click Rescan to scan for available wireless networks. After scanning, use the drop-down menu to select an available wireless network. All of the related information (SSID, Wireless Mode, Channel, Authentication, and Encryption) will automatically be filled in for you. SSID: Enter the SSID of the wireless access point you wish to use. Wireless Mode: Use the drop-down menu to select the mode of the wireless network you wish to connect to. Infrastructure is normally used to connect to an access point or router. Ad Hoc is usually used to connect directly to a computer. Channel: If you are using Ad Hoc mode, select the channel of the wireless network you wish to connect to, or select Auto. Authentication: Select the authentication you use on your wireless network - Open, Shared, WPA-PSK, or WPA2-PSK. Encryption: If you use WPA-PSK or WPA2-PSK authentication, you will need to specify whether your wireless network uses TKIP or AES encryption. If you use Open or Shared authentication, WEP encryption should be the setting. Key: If you use WEP, WPA-PSK, or WPA2-PSK authentication, enter the Key (also known as password) used for your wireless network. D-Link DCS-2132L User Manual 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
39
D-Link DCS-2132L User Manual
Section 4: Configuration
Wireless Setup
This section allows you to set up and configure the wireless settings on your camera. After making any changes, click
Save Settings
.
Enable Wireless:
Site Survey:
SSID:
Wireless Mode:
Channel:
Authentication:
Encryption:
Key:
Check the box to
Enable Wireless
.
Click
Rescan
to scan for available wireless networks. After
scanning, use the drop-down menu to select an available
wireless network. All of the related information
(SSID,
Wireless Mode,
Channel,
Authentication, and Encryption)
will automatically be filled in for you.
Enter the SSID of the wireless access point you wish to use.
Use the drop-down menu to select the mode of the
wireless network you wish to connect to. Infrastructure is
normally used to connect to an access point or router. Ad
Hoc is usually used to connect directly to a computer.
If you are using Ad Hoc mode, select the channel of the
wireless network you wish to connect to, or select Auto.
Select the authentication you use on your wireless
network - Open, Shared, WPA-PSK, or WPA2-PSK.
If you use WPA-PSK or WPA2-PSK authentication, you
will need to specify whether your wireless network
uses TKIP or AES encryption. If you use Open or Shared
authentication, WEP encryption should be the setting.
If you use WEP, WPA-PSK, or WPA2-PSK authentication,
enter the Key (also known as password) used for your
wireless network.