D-Link DCS-5610 User Manual - Page 23
Client Setup
UPC - 790069309434
View all D-Link DCS-5610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Section 3 - Configuration Client Setup You may configure and select the setting for your media streaming and recording Stream Options: You can select which video stream profile to use. Media Options: Allows the user to determine whether to receive only video, audio, or both video & audio. Protocol Options: There are 4 protocols for you to choose for the video streaming. UDP Protocol: This is recommended because it is an ideal protocol for transmitting real-time audio and video data, which can tolerate some lost packets. UDP Unicast: Will stream to a single computer. UDP Multicast Will stream to multiple computers using multicast. TCP: Provides higher quality video streaming than UDP does. It provides error correction and guarantees packet to be delivered to client. However, transmission speed will be reduced. HTTP Protocol: Offers the highest image and video quality. However, packet losses will diminish image quality when bandwidth becomes restricted. If the network is protected by a firewall and it opens HTTP port (80) only, HTTP protocol must be selected. In this mode, audio is disabled and only video can be viewed. UDP connections will not be available to remote users if all four ports have not been forwarded (as shown on page 32). Only the HTTP port must be forwarded for remote users to make an HTTP connection (video only). Record Options: Allows the user to specify a destination folder and prefix filename for the recorded video. D-Link DCS-5610 User Manual 23