D-Link DCS-5610 User Manual - Page 8
Hardware Overview - camera d link
UPC - 790069309434
View all D-Link DCS-5610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Section 1 - Product Overview Hardware Overview Connections DC Power Connector The DC power input connector is located on the DCS-5610 Internet Camera's back panel and is labeled 12V DC with a single socket to supply power to the Internet Camera. Reset Button Reset will be initiated when the reset button is pressed once and held 30 seconds until the Power LED flashes through its cycle twice. MIC On/Off Switch Used to turn the microphone on or off. Ethernet Cable Connector (PoE) The Internet Camera's back panel features an RJ-45 connector for connections to 10Base-T Ethernet cabling or 100Base-TX Fast Ethernet cabling.This network port supports the NWay protocol, allowing the Internet Camera to automatically detect or negotiate the transmission speed of the network. The Ethernet port can also be used to power the camera using a PoE switch. Microphone Connector The DCS-5610 Internet Camera has an internal microphone built-in. However, you have the option of using an external microphone by plugging it into the microphone connector. Audio Out Connector The DCS-5610 provides an Audio Out connector to be used for 2-way audio. Speakers (not included) may be connected to the camera to provide audio for 2-way communication. I/O Connector The DCS-5610 provides a terminal block with two pairs of connectors situated on the back panel. One pair is for input and the other is for output. The I/O connectors provide the physical interface to send and receive digital signals to and from a variety of external devices. D-Link DCS-5610 User Manual