D-Link DCS-5610 User Manual - Page 39

Section 3 - Configuration Motion Detection Enabling Motion Detection will allow up to three windows that can be created with different settings for monitoring. This allows your camera to serve as a security device that will record when motion is detected. Enable motion Check this option to turn on the motion detection. detection: Window name: Create your own name for the monitored area/ window. It will show at the top of the motion window. Sensitivity: Set the measurable difference between two sequential images that would indicate motion. Percentage: Set the amount of motion in the window being monitored that is required to initiate a motion detected alert. If this is set to 100%, this means that motion is detected within the whole window to trigger a snapshot. Note: Setting a higher sensitivity and a lower percentage will make any motion more easily. New: Click to add a new window. A maximum of three motion windows can be opened simultaneously. Use your mouse to drag the window frame to re-size or the title bar to move. Clicking on the 'x' at the upper right corner of the window will close the window. Save: Save the related settings of that window. D-Link DCS-5610 User Manual 39