D-Link DCS-5610 User Manual - Page 47
Camera Control
UPC - 790069309434
View all D-Link DCS-5610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Section 3 - Configuration Camera Control Here you can preset the locations and change the default location for your home button. Up, Down, Left, "Home" aims the camera to the center, Right, Home: where as the other buttons aim the camera accordingly. Zoom (-): Zoom widely function. Zoom (+): Zoom telescopically function Pan Speed: Select the speed at which the camera will pan for a full cycle from the pull down menu. Select a value between -5 and +5, -5 being the slowest setting. Tilt Speed: Select the speed at which the camera will tilt for a full cycle from the pull down menu. Select a value between -5 and +5, -5 being the slowest setting. Zoom Speed: Select the speed at which the camera will zoom for a full cycle from the pull down menu. Select a value between -5 and +5, -5 being the slowest setting. Auto pan/patrol Select the speed at which the camera will pan speed: during auto patrol. Select a value between 1 and 5, 1 being the slowest setting. Dwelling time (sec): Set the value of time that the camera will remain on each preset position before moving to the next. The dwelling time can be set between 1 and 255 seconds. Preset locations: Desired positions that have been configured. Selected locations: To use the Auto Patrol feature, select the desired preset positions from the Preset Locations list and add them to the Selected Locations list by clicking Select.You can then select the order in which the camera will patrol through the preset locations by selecting a location and clicking UP or DN. Click Remove to remove a location from the list. D-Link DCS-5610 User Manual 47