D-Link DCS-5610 User Manual - Page 33

Authentication, Secondary HTTP, Access name for, stream1, stream2, FTP Port, RTSP Streaming

Get D-Link DCS-5610 - SECURICAM Network Camera PDF manuals and user guides
UPC - 790069309434
View all D-Link DCS-5610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Section 3 - Configuration HTTP: You may configure two HTTP ports for your camera. HTTP ports allow you to connect to the camera via a standard web browser. These ports can be set to a number other than the default TCP ports 80 and 8080. A corresponding port must be opened on the router. For example, if the port is changed to 1010, users must type in the web browser "http://192.168.0.100:1010" instead of "http://192.168.0.100". Authentication: Authentication: Choose either Basic where the password is not encrypted, or Digest where the password is encrypted during the transmission to the web server. HTTP Port: The default value is 80. Secondary HTTP The default value is 8080. Port: After you have enabled the Authentication, you will need to configure and use the access name to access your video file. For example, http://camera ip/video.mjpg (video.mjpg is the Access name, you can modify it here) Access name for The default name is video.mjpg. stream1: Access name for The default name is video2.mjpg. stream2: FTP Port: Default port is 21. If you want to change the port number, you will need to specify the port when connecting to the FTP server. For example FTP://68.5.1.81:60 (if you use port 60 for your FTP server) RTSP Streaming: This setting enables you to connect to a camera by using streaming mobile device(s), such as a mobile phone or PDA. Authentication: Choose either Basic where the password is not encrypted, or Digest where the password is encrypted during the transmission to the web server. After you have enabled the Authentication, you will need to configure and use the access name to access your video file. RTSP://camera ip/live.sdp (live.sdp is the default access name, you can modify it here) Access name for The default name is live.sdp. stream1: Access name for The default name is live2.sdp. stream2: D-Link DCS-5610 User Manual 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
²²
D-Link DCS-5610 User Manual
Section ² - Configuration
HTTP:
Authentication:
HTTP Port:
Secondary HTTP
Port:
Access name for
stream1:
Access name for
stream2:
FTP Port:
RTSP Streaming:
Authentication:
Access name for
stream1:
Access name for
stream2:
You may configure two HTTP ports for your camera. HTTP ports allow you to connect to the camera via a standard web browser.
These ports can be set to a number other than the default TCP ports 80 and 8080. A corresponding port must be opened
on the router. For example, if the port is changed to 1010, users must type in the web browser “http://192.168.0.100:1010”
Authentication
: Choose either
Basic
where the password is not encrypted, or
Digest
where the password is encrypted
during the transmission to the web server.
The default value is 80.
The default value is 8080.
After you have enabled the
Authentication
, you will need to configure and use the access name to access your video file.
For example,
http://camera ip/video.mjpg
(video.mjpg is the
Access name
, you can modify it here)
The default name is video.mjpg.
The default name is video2.mjpg.
Default port is 21. If you want to change the port number, you will need to specify the port when connecting to the FTP server.
For example FTP://68.5.1.81:60 (if you use port 60 for your FTP server)
This setting enables you to connect to a camera by using streaming mobile device(s), such as a mobile phone or PDA.
Choose either
Basic
where the password is not encrypted, or
Digest
where the password is encrypted during the transmission
to the web server. After you have enabled the
Authentication
, you will need to configure and use the access name to access
your video file.
RTSP://camera ip/live.sdp
(live.sdp is the default access name, you can modify it here)
The default name is live.sdp.
The default name is live2.sdp.