D-Link DG-104SH Product Manual - Page 23

Configuring the SNMP, Subnet mask, IP address, BOOTP, Default gateway

Get D-Link DG-104SH PDF manuals and user guides View all D-Link DG-104SH manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Using the Boot Menu Configuring the IP BOOTP: When BOOTP is selected, the VoIP gateway will attempt to obtain its IP settings from a BOOTP server located on your LAN. DHCP: When DHCP is selected, the VoIP gateway will attempt to obtain its IP settings from a DHCP server located on your LAN. „ IP address: Enter an IP address for the VoIP gateway. „ Subnet mask: Enter a subnet mask for the VoIP gateway. „ Default gateway: Enter the IP address of the WAN device (usually a router) you are using to make the WAN connection. After you have finished, press to save changes to RAM. Next, press the key to return to the Boot Menu. Position the cursor over the Save Changes item and press . This will save the settings to NV-RAM so they will still be present after powering off or restarting the device. Make sure the Reset button on the rear panel of the device is in the down position. Position the cursor over the Restart System item and press for the changes to take effect. Your VoIP is now configured for use. Configuring the SNMP This screen allows you to set an SNMP trap manager. Boot Menu-SNMP Configuration screen 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
23
Using the Boot Menu
After you have finished, press <Ctrl+S> to save changes to RAM. Next, press
the <Esc> key to return to the Boot Menu. Position the cursor over the
Save
Changes
item and press <Enter>. This will save the settings to NV-RAM so
they will still be present after powering off or restarting the device. Make sure
the
Reset
button on the rear panel of the device is in the down position. Position
the cursor over the
Restart System
item and press <Enter> for the changes to
take effect. Your VoIP is now configured for use.
Configuring the IP
Configuring the SNMP
This screen allows you to set an SNMP trap manager.
Boot Menu—SNMP Configuration screen
Subnet mask:
Enter a subnet mask for the VoIP gateway.
DHCP:
When
DHCP
is selected, the VoIP gateway will attempt to ob-
tain its IP settings from a DHCP server located on your LAN.
IP address:
Enter an IP address for the VoIP gateway.
BOOTP:
When
BOOTP
is selected, the VoIP gateway will attempt to
obtain its IP settings from a BOOTP server located on your LAN.
Default gateway:
Enter the IP address of the WAN device (usually a
router) you are using to make the WAN connection
.