D-Link DGL-4500 Product Manual

D-Link DGL-4500 - GamerLounge Xtreme N Gaming Router Wireless Manual

Get D-Link DGL-4500 - GamerLounge Xtreme N Gaming Router Wireless PDF manuals and user guides
UPC - 790069309540
View all D-Link DGL-4500 manuals
Add to My Manuals
Save this manual to your list of manuals

D-Link DGL-4500 manual content summary:

  • D-Link DGL-4500 | Product Manual - Page 1
  • D-Link DGL-4500 | Product Manual - Page 2
    2009 Description DGL-4500 Revision A1 with firmware version 1.00 Removed WDS support (firmware 1.02) Updated OLED screens Removed Big Pond support Updated the Technical Specifications section Updated with firmware 1.12 Advanced DNS and CAPTCHA Trademarks D-Link and the D-Link logo are trademarks
  • D-Link DGL-4500 | Product Manual - Page 3
    32 Virtual Server 33 Application Rules 35 Gaming 36 GameFuel 37 Classification 37 Change Uplink Speed 37 Routing 39 Access Control 40 Access Control Wizard 40 Website Filters 43 MAC Address Filters 44 Firewall Settings 45 Enable SPI 45 DMZ 45 D-Link DGL-4500 User Manual iii
  • D-Link DGL-4500 | Product Manual - Page 4
    WPA-Personal (PSK 72 Configure WPA-Enterprise (RADIUS 73 Connect to a Wireless Network 75 Using Windows Vista 75 Configure Wireless Security 76 Connect Using WCN 2.0 in Windows Vista 78 Connect to a Wireless Network 79 Using Windows® XP 79 Configure WEP 80 D-Link DGL-4500 User Manual iv
  • D-Link DGL-4500 | Product Manual - Page 5
    82 Troubleshooting 84 Wireless Basics 88 What is Wireless 89 Tips 91 Wireless Modes 92 Networking Basics 93 Check your IP address 93 Statically Assign an IP address 94 Technical Specifications 95 Contacting Technical Support 96 Warranty 97 Registration 103 D-Link DGL-4500 User Manual 
  • D-Link DGL-4500 | Product Manual - Page 6
    PPraocdkuacgteOCvoenrtevnietsw D-Link DGL-4500 Gaming Router Power Adapter Ethernet Cable CD-ROM Stand Note: Using a power supply with a different voltage rating than the one included with the DGL-4500 will cause damage and void the warranty for this product. D-Link DGL-4500 User Manual 
  • D-Link DGL-4500 | Product Manual - Page 7
    • An Ethernet-based Cable or DSL modem • IEEE 802.11n-draft/g/a wireless clients • 10/100/1000 Ethernet Computer with the following: • Windows®, Macintosh with the following: • Windows® XP with Service Pack 2 or Vista® • An installed Ethernet adapter • CD-ROM drive D-Link DGL-4500 User Manual 
  • D-Link DGL-4500 | Product Manual - Page 8
    set of security features including Active Firewall and WPA/WPA2 to protect your network against outside intruders TOTAL COVERAGE Provides greater wireless signal rates even at farther distances for best-in-class Whole Home Coverage. ULTIMATE PERFORMANCE The D-Link Xtreme N™ Gaming Router (DGL-4500
  • D-Link DGL-4500 | Product Manual - Page 9
    . • User-friendly Setup Wizard - Through its easy-to-use Web-based user interface, the DGL-4500 lets you control what information is accessible to those on the wireless network, whether from the Internet or from your company's server. Configure your router to your specific settings within minutes
  • D-Link DGL-4500 | Product Manual - Page 10
    settings. Gigabit LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and hubs. Internet Port The auto MDI/MDIX Internet port is the connection for the Ethernet cable to the cable or DSL modem. Power Receptor Receptor for the supplied power adapter. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 11
    Section 1 - Product Overview Hardware Overview LEDs OLED Screen Displays information regarding the router (see next page). D-Link DGL-4500 User Manual Power LED A solid light indicates a proper connection to the power supply. WPS LED (side of unit) A solid light indicates a successful WPS
  • D-Link DGL-4500 | Product Manual - Page 12
    . 2 Menu Select to display the OLED main menu. 3 Performance Select to display the data of the LAN, WAN, and wireless connections. 4 WPS Displays the WPS status. 5 Date/Time Displays the routers date and time. 6 Status Displays the device status. D-Link DGL-4500 User Manual 
  • D-Link DGL-4500 | Product Manual - Page 13
    the Setup Wizard from the D-Link CD, make sure the computer you are running the CD from is connected to the Internet and online or the wizard will not work. If you have disconnected any hardware, re-connect your computer back to the modem and make sure you are online. D-Link DGL-4500 User Manual 
  • D-Link DGL-4500 | Product Manual - Page 14
    position access points, wireless routers, and computers so wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 15
    Section 2 - Installation Network Diagram D-Link DGL-4500 User Manual 10
  • D-Link DGL-4500 | Product Manual - Page 16
    plug in your modem. Wait for the modem to boot (about 30 seconds). 6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the router to boot. 7. Turn on your computer. 8. Refer to page 15 to configure your router. D-Link DGL-4500 User Manual 11
  • D-Link DGL-4500 | Product Manual - Page 17
    and the subnet mask of your network. Click Save Settings to save your settings. Use this new IP address to access the configuration utility of the router in the future. Close the browser and change your computer's IP settings back to the original values as in Step 1. D-Link DGL-4500 User Manual 12
  • D-Link DGL-4500 | Product Manual - Page 18
    ports to connect other Ethernet devices and computers.To configure your wireless network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless Security sections for more information on setting up your wireless network. D-Link DGL-4500 User
  • D-Link DGL-4500 | Product Manual - Page 19
    function does not automatically start on your computer, go to Start > Run. In the run box type "D:\DGL4500.exe" (where D: represents the drive letter of your CD-ROM drive). When the autorun screen appears, click BEGIN INSTALL and follow the on-screen instructions. D-Link DGL-4500 User Manual 14
  • D-Link DGL-4500 | Product Manual - Page 20
    new D-Link wireless router using password. Leave the password blank by default. Type in the graphical authentication code (if you cannot read it, click Regenerate). If you get a Page Cannot be Displayed error, please refer to the Troubleshooting section for assistance. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 21
    Setup Wizard and skip to page 67. You may click Setup Wizard to quickly configure your router. If you want to enter your settings without running the wizard, click on Internet on the left side and then click Manual Configure and skip to page 20. Click Next to continue. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 22
    Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. Select your ISP from the drop-down menu or select the type of Internet connection you use and then click Next to continue. D-Link DGL-4500 User Manual 17
  • D-Link DGL-4500 | Product Manual - Page 23
    DNS server addresses. Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Click Next to continue. D-Link DGL-4500 User Manual 18
  • D-Link DGL-4500 | Product Manual - Page 24
    . Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1-2 minutes to connect. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet. D-Link DGL-4500 User Manual 19
  • D-Link DGL-4500 | Product Manual - Page 25
    having problems obtaining an IP address from your ISP. DNS Addresses: Enter the Primary DNS server IP address assigned by your ISP. MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1500 is the default MTU. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 26
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DGL-4500 User Manual 21
  • D-Link DGL-4500 | Product Manual - Page 27
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DGL-4500 User Manual 22
  • D-Link DGL-4500 | Product Manual - Page 28
    or Manual. Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this feature, enable Always-on. DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) D-Link DGL-4500 User Manual 23
  • D-Link DGL-4500 | Product Manual - Page 29
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DGL-4500 User Manual 24
  • D-Link DGL-4500 | Product Manual - Page 30
    , On-Demand, or Manual. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Always-on. DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static L2TP only). D-Link DGL-4500 User Manual 25
  • D-Link DGL-4500 | Product Manual - Page 31
    on the Broadband Router. It is not Address: recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DGL-4500 User Manual 26
  • D-Link DGL-4500 | Product Manual - Page 32
    MAC address on the Broadband Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC's MAC Address button to replace the Internet port's MAC address with the MAC address of your Ethernet card. D-Link DGL-4500 User Manual 27
  • D-Link DGL-4500 | Product Manual - Page 33
    . 5GHz: Select one of the following: 802.11a Only - Select if all of your wireless clients are 802.11a. 802.11n Only - Select only if all of your wireless clients are 802.11n. 802.11n and 802.11a - Select if you are using both 802.11b and 802.11g wireless clients. D-Link DGL-4500 User Manual 28
  • D-Link DGL-4500 | Product Manual - Page 34
    Configuration Enable Auto The Auto Channel Scan setting can be selected to allow the DGL-4500 to choose the channel with the least amount of Channel Scan: interference. Wireless Channel: Indicates the channel setting for the DGL-4500. By default the channel is set to 6. The Channel can be changed to
  • D-Link DGL-4500 | Product Manual - Page 35
    Mask. The default subnet mask is 255.255.255.0. Local Domain: Enter the Domain name (Optional). Enable DNS Relay: Uncheck the box to transfer the DNS server information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DGL-4500 User Manual 30
  • D-Link DGL-4500 | Product Manual - Page 36
    network hosts operates. This setting has no effect if the 'Learn NetBIOS information from WAN' is activated. NetBIOS Node: Select the different type of NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode, and Hybrid. WINS IP Address: Enter your WINS IP address D-Link DGL-4500 User Manual 31
  • D-Link DGL-4500 | Product Manual - Page 37
    same IP address assigned, you can create a DHCP reservation. The router will assign the IP address only to that computer or device. button to populate the fields. Save: Click Save to save your entry. You must click Save Settings at the top to activate your reservations. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 38
    are pre-defined virtual services already in the table. You may use them by enabling them and assigning the server IP to use that particular virtual service. For a list of ports for common applications, please visit http://support.dlink.com/faq/view.asp?prod_id=1191. D-Link DGL-4500 User Manual 33
  • D-Link DGL-4500 | Product Manual - Page 39
    the particular service to always be enabled.You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter. You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DGL-4500 User Manual 34
  • D-Link DGL-4500 | Product Manual - Page 40
    firewall port (TCP, UDP, or Both). Schedule: The schedule of time when the Application Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 41
    the particular service to always be enabled. You can create your own times in the Tools > Schedules section. Inbound Filter: Select Allow All (most common) or a created Inbound filter.You may create your own inbound filters in the Advanced > Inbound Filter page. D-Link DGL-4500 User Manual 36
  • D-Link DGL-4500 | Product Manual - Page 42
    Speed: router to your ISP. This is determined by your ISP. ISP's often speed as a download/upload pair. For example, 1.5Mbits/284Kbits. Using this example, you would enter 284. Alternatively you can test your uplink speed with a service such as www.dslreports.com. D-Link DGL-4500 User Manual 37
  • D-Link DGL-4500 | Product Manual - Page 43
    Static" or "DHCP" in the Internet settings, setting this option to xDSL or Other Frame Relay Network ensures that the router will recognize that it needs to shape When Connection Type is set to automatic, the automatically detected connection type is displayed here. D-Link DGL-4500 User Manual 38
  • D-Link DGL-4500 | Product Manual - Page 44
    IP address. Metric: Enter the route's priority. The higher the number the lower the priority. Interface: Select LAN or WAN from the drop-down menu. D-Link DGL-4500 User Manual 39
  • D-Link DGL-4500 | Product Manual - Page 45
    to approved sites, limit web access based on time or dates, and/or block access from applications like P2P utilities or games. Add Policy: Click the Add Policy button to start the Access Control Wizard. Access Control Wizard Click Next to continue with the wizard. D-Link DGL-4500 User Manual 40
  • D-Link DGL-4500 | Product Manual - Page 46
    Type - Select IP address, MAC address, or Other Machines. • IP Address - Enter the IP address of the computer you want to apply the rule to. D-Link DGL-4500 User Manual 41
  • D-Link DGL-4500 | Product Manual - Page 47
    IP address. Dest IP End - Enter the ending IP address. Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. Click Save to save the access control rule. D-Link DGL-4500 User Manual 42
  • D-Link DGL-4500 | Product Manual - Page 48
    , and then click Save Settings. You must also select Apply Web Filter under the Access Control section (page 40). Add Website Select Allow or Deny. Filtering Rule: Website Filtering Enter the keywords or URLs that you want to List: allow or deny and then click Add. D-Link DGL-4500 User Manual 43
  • D-Link DGL-4500 | Product Manual - Page 49
    manually add a MAC address or select the MAC address from the list of clients that are currently connected to the Broadband Router. manual. DHCP Client: Select a DHCP client from the drop-down menu and click
  • D-Link DGL-4500 | Product Manual - Page 50
    the IP address of the DMZ machine does not change. Non-UDP/TCP/ICMP Enable this feature to allow the router' NAT to track application that uses protocols other than UDP, TCP or ICMP. LAN Sessions: ALG: Check the PPTP, IPSec, RTSP, and SIP boxes to allow pass-through. D-Link DGL-4500 User Manual 45
  • D-Link DGL-4500 | Product Manual - Page 51
    Server, Port Forwarding, or Settings at the top to save the settings. Inbound Filter This section will list any rules that are created. Rules List: You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 52
    is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it's less reliable and may create higher data loss. D-Link DGL-4500
  • D-Link DGL-4500 | Product Manual - Page 53
    . For most applications, the priority classifiers ensure the right priorities and specific WISH Rules are not required. WISH supports overlaps between rules. If more than one rule matches for a specific message flow, the rule with the highest priority will be used. D-Link DGL-4500 User Manual 48
  • D-Link DGL-4500 | Product Manual - Page 54
    . Host IP Range: The rule applies to a flow of messages for which one computer's IP address falls within the range set here. Host Port Range: The rule applies to a flow of messages for which host's port number is within the range set here. Add: Click to add the rule. D-Link DGL-4500 User Manual 49
  • D-Link DGL-4500 | Product Manual - Page 55
    : Shows the current value of the router's PIN. Reset PIN to Restore the default PIN of the router. Default: Generate New Create a random number that is a valid PIN. This becomes the router's PIN. You can then copy this PIN to the user interface PIN: of the registrar. D-Link DGL-4500 User Manual 50
  • D-Link DGL-4500 | Product Manual - Page 56
    the wireless network if you have entered the PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well. Add Wireless Start the wizard. Device Wizard: D-Link DGL-4500 User Manual 51
  • D-Link DGL-4500 | Product Manual - Page 57
    : You may set the port speed of the Internet port to 10Mbps, 100Mbps, or auto. Some older cable or DSL modems may require you to set the port speed to 10Mbps. Multicast streams: Check the box to allow multicast traffic to pass through the router from the Internet. D-Link DGL-4500 User Manual 52
  • D-Link DGL-4500 | Product Manual - Page 58
    of the DGL-4500 and 8080 is the port used for the Web Management interface. Inbound Filter: This section will list any rules that are created.You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Link DGL-4500 User Manual 53
  • D-Link DGL-4500 | Product Manual - Page 59
    Used: Enter the NTP server or select one from the drop-down menu. Manual: To manually input the time, enter the values in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Copy Your Computer's Time Settings. D-Link DGL-4500 User Manual 54
  • D-Link DGL-4500 | Product Manual - Page 60
    the router logs to a SysLog Server: SysLog Server. SysLog Server IP The address of the SysLog server that will be Address: used to send the logs. You may also select your computer from the drop-down menu (only if receiving an IP address from the router via DHCP). D-Link DGL-4500 User Manual 55
  • D-Link DGL-4500 | Product Manual - Page 61
    Settings The Email feature can be used to send the system log files, router alert messages, and firmware update notification to your email address. Enable Email When this option is enabled, router of defined schedules. To create a schedule, go to Tools > Schedules. D-Link DGL-4500 User Manual 56
  • D-Link DGL-4500 | Product Manual - Page 62
    the router was shipped from the factory. Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Reboot Device: Click to reboot the router. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 63
    Check Online for Latest Options: Firmware Version to have the router check automatically to see if there is a new firmware upgrade. Check Email Notification of Newer Firmware Version to have the router send an email when there is a new firmware available. D-Link DGL-4500 User Manual 58
  • D-Link DGL-4500 | Product Manual - Page 64
    Name: Enter the Host Name that you registered with your DDNS service provider. Username or Key: Enter the Username for your DDNS account. Password or Key: Enter the Password for your DDNS account. Timeout: Enter a time (in hours). Status: Displays the current status. D-Link DGL-4500 User Manual 59
  • D-Link DGL-4500 | Product Manual - Page 65
    Section 3 - Configuration System Check Ping Test: The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. Ping Results: The results of your ping attempts will be displayed here. D-Link DGL-4500 User Manual 60
  • D-Link DGL-4500 | Product Manual - Page 66
    . Add: Click Add to save your schedule. You must click Save Settings at the top for your schedules to go into effect. Schedule Rules The list of schedules will be listed here. Click the List: Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DGL-4500 User Manual 61
  • D-Link DGL-4500 | Product Manual - Page 67
    router. Wireless LAN: Displays the wireless MAC address and your wireless settings such as SSID and Channel. LAN Computers: Displays computers and devices that are connected to the router via Ethernet and that are receiving an IP address assigned by the router (DHCP). D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 68
    Section 3 - Configuration Wireless The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. The Routing page displays the routing table. Routing D-Link DGL-4500 User Manual 63
  • D-Link DGL-4500 | Product Manual - Page 69
    it displays any recent activity. Clear: Clears all of the log contents. Email Now: This option will send a copy of the router log to the email address configured in the Tools > Email screen. Save Log: This option will save the router to a log file on your computer. D-Link DGL-4500 User Manual 64
  • D-Link DGL-4500 | Product Manual - Page 70
    3 - Configuration Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DGL-4500 on both the Internet and the LAN ports. The traffic counter will reset if the device is rebooted. Internet Sessions D-Link DGL-4500 User Manual 65
  • D-Link DGL-4500 | Product Manual - Page 71
    Section 3 - Configuration Wish Sessions Help D-Link DGL-4500 User Manual 66
  • D-Link DGL-4500 | Product Manual - Page 72
    on your wireless router or access point. WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DGL-4500 User Manual 67
  • D-Link DGL-4500 | Product Manual - Page 73
    : Select this option to automatically generate the router's network key and click Next. Manually: Select this option to manually enter your network key and click Next. Check the "Use WPA encryption..." box to use WPA instead of WEP (strongly recommended). D-Link DGL-4500 User Manual 68
  • D-Link DGL-4500 | Product Manual - Page 74
    summary window will display your settings. Write down the security key and enter this on your wireless clients. Click Save to save your settings. If you selected Manually, the following screen will (only 0-9 and A-F are valid). Click Save to save your settings. D-Link DGL-4500 User Manual 69
  • D-Link DGL-4500 | Product Manual - Page 75
    this on your wireless clients. PIN: Select this option to use PIN method. In order to use this method you must know the wireless client's 8 digit PIN and click Connect. PBC: Select this option to use PBC (Push Button) method to add a wireless client. Click Connect. D-Link DGL-4500 User Manual 70
  • D-Link DGL-4500 | Product Manual - Page 76
    5. Next to Authentication, select Shared Key. 6. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DGL-4500 User Manual 71
  • D-Link DGL-4500 | Product Manual - Page 77
    must be between 8-63 characters. 7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Link DGL-4500 User Manual 72
  • D-Link DGL-4500 | Product Manual - Page 78
    the added overhead. 1. Log into the web-based configuration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on Setup and then click Wireless Settings on the left side. 2. Next to Security Mode, select WPA-Enterprise. 3. Next to WPA Mode, select Auto, WPA2 Only
  • D-Link DGL-4500 | Product Manual - Page 79
    If the MAC Address Authentication box is selected then the user will need to connect from the same computer whenever logging into the wireless network. 11. Click Advanced to enter settings for a secondary RADIUS Server. 12. Click Apply Settings to save your settings. D-Link DGL-4500 User Manual 74
  • D-Link DGL-4500 | Product Manual - Page 80
    area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DGL-4500 User Manual 75
  • D-Link DGL-4500 | Product Manual - Page 81
    used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DGL-4500 User Manual 76
  • D-Link DGL-4500 | Product Manual - Page 82
    passphrase that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DGL-4500 User Manual 77
  • D-Link DGL-4500 | Product Manual - Page 83
    PIN to Default button. For additional information, please refer to page 50. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DGL-4500 User Manual 78
  • D-Link DGL-4500 | Product Manual - Page 84
    area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DGL-4500 User Manual 79
  • D-Link DGL-4500 | Product Manual - Page 85
    the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DGL-4500 User Manual 80
  • D-Link DGL-4500 | Product Manual - Page 86
    . Enter the same WEP key that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless router. D-Link DGL-4500 User Manual 81
  • D-Link DGL-4500 | Product Manual - Page 87
    Open the Windows® XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DGL-4500 User Manual 82
  • D-Link DGL-4500 | Product Manual - Page 88
    . Enter the WPA-PSK passphrase and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DGL-4500 User Manual 83
  • D-Link DGL-4500 | Product Manual - Page 89
    Section 6 - Troubleshooting Troubleshooting This chapter provides solutions to problems that can occur during the installation and operation of the DGL-4500. Read the following descriptions if you are having problems. (The examples below are illustrated in Windows® XP. If you have a different
  • D-Link DGL-4500 | Product Manual - Page 90
    to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, the username is admin and leave the password box empty. D-Link DGL-4500 User Manual 85
  • D-Link DGL-4500 | Product Manual - Page 91
    in cmd) and press Enter (or click OK). • Once the window opens, you'll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DGL-4500 User Manual 86
  • D-Link DGL-4500 | Product Manual - Page 92
    • Click on Setup and then click Manual Configure. • To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DGL-4500 User Manual 87
  • D-Link DGL-4500 | Product Manual - Page 93
    cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A Wireless Router is a device used to provide this link. D-Link DGL-4500 User Manual 88
  • D-Link DGL-4500 | Product Manual - Page 94
    D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link campuses, airports, golf courses, and many other outdoor venues. D-Link DGL-4500 User Manual 89
  • D-Link DGL-4500 | Product Manual - Page 95
    PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether printer with multiple computers • No need to dedicate office space D-Link DGL-4500 User Manual 90
  • D-Link DGL-4500 | Product Manual - Page 96
    Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DGL-4500 User Manual 91
  • D-Link DGL-4500 | Product Manual - Page 97
    Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless Cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DGL-4500 User Manual 92
  • D-Link DGL-4500 | Product Manual - Page 98
    the IP address, subnet mask, and the default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DGL-4500 User Manual 93
  • D-Link DGL-4500 | Product Manual - Page 99
    . Set Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set Primary DNS the same as the LAN IP address of your router (192.168.0.1).The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DGL-4500
  • D-Link DGL-4500 | Product Manual - Page 100
    , and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. 2 Frequency Range varies depending on country's regulation 3 The DGL-4500 does not include 5.25-5.35GHz & 5.47-5.725GHz in some regions. D-Link DGL-4500 User Manual 95
  • D-Link DGL-4500 | Product Manual - Page 101
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.com D-Link DGL-4500 User Manual 96
  • D-Link DGL-4500 | Product Manual - Page 102
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DGL-4500 User Manual 97
  • D-Link DGL-4500 | Product Manual - Page 103
    D-Link's then current functional specifications for the Software, as set forth price paid that is attributable to the Software. Except as otherwise agreed by D-Link must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will dlink.com/. D-Link DGL-4500 User Manual 98
  • D-Link DGL-4500 | Product Manual - Page 104
    firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. D-Link DGL-4500 User Manual 99
  • D-Link DGL-4500 | Product Manual - Page 105
    SET Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice. Copyright ©2008-2009 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 106
    and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DGL-4500 User Manual
  • D-Link DGL-4500 | Product Manual - Page 107
    complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. les interférences pouvant perturber le bon fonctionnement de ce périphérique. D-Link DGL-4500 User Manual 102
  • D-Link DGL-4500 | Product Manual - Page 108
    Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.5 July 9, 2009 D-Link DGL-4500 User Manual 103
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108